What's the intention here? Use the bigger SSD only for storage or clone the original SSD and migrate the OS and your apps onto the bigger SSD? If your intention is to clone/migrate to the bigger SSD, do we know this PC will boot from an SSD connected via a PCI-e>NVME adapter card?
There was another XPS 8940 thread where the combination of a StarTech PCI-e x4>NVME adapter card and a Samsung SSD didn't work for storage even though, in theory, that should work. So how can anyone predict ahead of time if the card you linked will actually work or not?
And keep in mind that many SSDs don't like to work when BIOS is set to RAID (default setting) so you may have to change that setting to AHCI. But before you do, you have to re-configure Windows on the current SSD to use AHCI. Otherwise you'll have to clean install Windows.
But do you need another SSD? Why not just install a 2T HDD, if you don't already have one, and use that for routine data storage, saving the space on the current SSD for Windows and your installed apps? Tell Win 10 to move its default output folders (docs, music, etc) to the HDD, and configure all your installed apps to save their output on the HDD too.
You could always get a large SATA SSD and install that in one of the two 2.5-inch hard-drive cages in the XPS 8940 and connect it to a SATA port on the motherboard. A SATA SSD should be bootable.
Or, just replace the existing SSD with a new, larger NVME SSD in the NVME slot.
My XPS 8940 comes with single 500GB M.2 nvme including OS.
Because 500GB is not enough to me, BUT I like to try to add one more M.2 ssd instead of INTERNAL SSD or HDD. Expecting SPEED as well as reliability.
Thanks
I don't understand...
An M.2 NVME SSD is an internalSSD, the same way a SATA SSD or SATA HDD is an internal drive. They all plug into ports on the motherboard.
If you're going to use the new SSD only for storage, is there really going to be that much of a speed advantage if it's an SSD vs a HDD? The real speed advantage comes when the OS and apps are installed on an SSD.
If you think there is an advantage, just replace the 500 GB SSD with a 1T or 2T NVME SSD and avoid any potential issues trying to use a PCI-e x4>NVME adapter.
And keep in mind, the more writes to an SSD, the shorter its lifespan can be. You write a lot more data, a lot more often to a drive than you write (install) apps so that may be an advantage of a HDD for routine storage.
ojcnet
6 Posts
7675
0
Posted November 12th, 2020 22:00
https://www.amazon.com/gp/product/B07JKH5VTL/ref=ox_sc_act_title_1?smid=A3F3TWMW51FQC7&psc=1
Is this adapter good for the above M.2 SSD ?