Pre-loaded Vista now says the product key is invalid, though the OS was
preloaded @ the factory.
I did not make any changes to the hardware. (It's harder to anyway with a notebook.) I think I have restarted my system before.
But now, after installing RealPlayer, it asked me to restart so I did. Now I get this window right after I type in my login password that says, "The Windows Vista Home Premium product key you typed is invalid for activation."
I don't even remember typing a product key; I don't think I needed to because the OS was installed at the factory anyways.
I typed in the product key found on the sticker at the bottom of my laptop and it said that was invalid. I don't know what happened now. What could possibly cause this, and what can I do to make Vista run completely normally again? Did anyone ever have an issue similar to this one?
Message Edited by chomusclavus on 10-03-2007 12:48 AM
This problem may occur because a specific system setting is removed when a program runs with administrative credentials. The removal of this system setting may cause a BIOS validation check to fail. The BIOS validation check is part of the system activation process. Therefore, you may be prompted to activate Windows Vista, even though the system did not previously require activation. For example, this problem is known to occur when you use Intuit QuickBooks 2007. However, this problem may also infrequently occur when you install other programs or device drivers.
Note This problem does not occur because of an issue in the installed program or device driver. This problem is caused by a system problem in Windows Vista.
Go to command prompt, right click in order to run as administrator. Run "slmgr -upk" (uninstall PID).
Then type the following “slmgr –ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx” The "xxxxx" are the product key (OEM Product Key located on the side or bottom of the machine)
Run "slmgr -rilc"
Then run "slmgr -rearm"
Reboot the computer.
Go into System Information, choose the option to activate your copy of Vista, it will fail. Choose the option to call in to activate it. Call in, it will again fail on the automated option. You will get a live rep from MS to enter the activation code. Get the return code to enter in on your system. Enter it, reboot, enjoy.
I know that is a good Work Around for the problem, but the underlying problem is still there. With a Dell installed system using the SLP Activation DVD Key from the PID.txt file on the DVD it should never require activation from Microsoft.
Here is the fix from the KB article I posted above:
RESOLUTION
To resolve this problem if it has already occurred
To resolve this problem if it has already occurred, use one of the following methods:
•
If you have been prompted to activate Windows Vista, and you have not used the product key to manually activate Windows Vista, install update 931573, and then restart the computer.
• If you have been prompted to activate Windows Vista, and you have used the product key to manually activateWindows Vista, install update 931573, and then activate Windows Vista by telephone.
If you do something to get somewhere by using an Unusual method that is a " Work Around ".
The Dell version of Vista or any other OS is factory Preactivated and should as such NEVER ask for a key code or activation either by the internet or phone ...
Microsoft is aware of what caused the issue and they have patches available for these issues. What happens when you use the CD key on the OEM sticker requires a call to Microsoft and the PC is no longer SLP activated as it was designed to be.
Work Around. Don't take this the wrong way as it will get the PC back.
I see where you are coming from, but one question comes to mind. If (and this happens as I have seen it personally) someone lets the activation run out, and Vista goes to limited mode, now would someone install the update from an IE window?
I would think that if you let it get to that point, all that is left is an image restore.
***please take this as a simple question, I am not trying to have a debate, just a simple "how to" type question.
I encountered this problem (..product key is invalid....) yesterday after automatically downloading updates. With technical support from Dell, I ended up temporarily resolving the problem by restoring my system to 3 days ago, before the updates were installed. Then, the rep had me turn off automatic updates. To me, this seemed like just putting a bandaid on the problem, but it got me back on my computer. This morning, I found this forum and your recommended fix to the problem. I downloaded 931573, but when I attempted to run it, it gave me an error message that "This update does not apply to your system", even though I do have Vista Home Premium. I'm afraid that the problem is still there and it's going to come up again. Do you have any suggestions as to why that fix didn't work for me? Thanks.
The reason that the fix says that it doesn't apply to your system is because it doesn't ( anymore anyway ).
Since you have rolled back the system to a time BEFORE the problem occurred then the problem doesn't exist now. The fix cannot fix something that doesn't exist.
This is what I would do.
Reenable the updates. Then wait and see it it happens again. If it does then apply the fix IAW the KB Article here:
It should then work using one of the methods described here:
RESOLUTION
To resolve this problem if it has already occurred
To resolve this problem if it has already occurred, use one of the following methods:
If you have been prompted to activate Windows Vista, and you have not used the product key to manually activate Windows Vista, install update 931573, and then restart the computer.
If you have been prompted to activate Windows Vista, and you have used the product key to manually activateWindows Vista, install update 931573, and then activate Windows Vista by telephone.
Thanks for the explanation. But, when this happened to me the first time, it completely locked me out of my desktop, so even if I had had the "fix" saved to my computer, I wouldn't have been able to run it (and I very well could be showing my computer illiteracy here). I'll cross my fingers that it doesn't happen again. BTW, somehow, the automatic updates turned itself back on automatically.
pcgeek11
2 Intern
•
1874 Posts
3309
0
Posted October 3rd, 2007 04:00
Note This problem does not occur because of an issue in the installed program or device driver. This problem is caused by a system problem in Windows Vista.