You can check the performance charts in the 'System Performance' page in VNXe Unisphere. You would have to click on the System tab in order to access this page.

It givs only Proccesor counter. no disks counters

is that applicable to only VNXe system in unisphere,?Or is there a need to be  on a particular code level?

I have couple of CX3 and Cx-4 i dont see the "system performance" under system tab .

Disk level counters are not available for VNXe systems. But you should be able to see network and volume statistics in Unisphere. Are you able to see those? You would need to be on the latest VNXe code for that.

Yes, the Unisphere versions for VNX and VNXe are different. I was referring to the Unisphere available for VNXe storage systems.

Hi all,

I have to extract VNXe performance metrics using UEMCLI commands.

For VNXe 1600, I am able to get paths for all performance metrics as it is a VNXe generation 2 device using commands /metrics/metric but for VNXe 3100 and VNXe3300 the command is showing Object not found error.

Please let me know if there are some other commands for last 2 mentioned devices to get performance data or the command is same and its some configuration issue or somethings needs to be enabled at storage device end.