UNSOLVED

adam19421

updated

12 years ago

A

adam19421

9 Posts

0

2023

May 1st, 2015 11:00

Get rebuild percent on Vault disks?

I'm completing a firmware update to fix this issue (https://emc--c.na5.visual.force.com/apex/KB_HowTo?id=kA0700000004JUi). This is a VNX1 with storage processors only - no control station/nas head.

I started with the vault drives which I understand can take a long time. These disks are unbound as we did not wish to use the vault drives as part of any pool/group.

The problem I am having is getting a rebuild % on the disk rebuild.

I've tried the following commands in navicli;

getdisk 0_0_0 -state

getdisk 0_0_0

getdisk 0_0_1 -rb

Each command shows either "rebuilding" or "unbound" both are true but I'm yet to get a rebuild percent. Does anyone know if its possible to get a % rebuild of the vault disk as these disks are essentially unused?

Cheers,

Adam.

  • Jyothi_P_Bharat

    1 Rookie

    •

    317 Posts

    781

    0

    Posted May 4th, 2015 07:00

    Hi Adam,

    You get that information in SP Collects or logs.Please contact EMC Support Team for further help.

    Thanks

    Jyothi

  • 780

    1

    Posted May 4th, 2015 11:00

    Hi Adam,

    For vault drives it is possible to check the percentage of rebuild process "online" using fcli (if you authorized to) or "offline" via checking raidgroups 1000 and 1001 in spcollects extraction.

    Regards,

    Pavel Goncharov