UNSOLVED
Can a SAN Copy Target Volume be Used as Recoverpoint Source Volume?
Hi There,
I am in the midst of performing a migration from VNX 5500 to a VNX5600. I an opting to use a storage based migration method. Part of the customers requirements are that the RecoverPoint Replication to DR must be started simultaneously done with the migration.
I am aware that the MirrorView target (VNX5600) cannot be used as a RecoverPoint Source LUN. Would a SAN Copy Target LUN be allow to be used as Recover Point source LUN?
If this is not possible, the only other mode of migration is by using Open Migrator (host based migration) which is more tedious as two host reboots are required. Thanks
The reason for fall back could be because the new volume could be corrupted hence migration back would not be an option. That what led me to my question. Thanks
Regards,
Vimal Jogesvaran
Senior Delivery Specialist
Professional Services
EMC Global Services, Malaysia
Tel : +603 2287 1788
Mobile : +6 012 281 7851
Email : vimal.jogesvaran@emc.com
[EMC_proven_expert]
3 Attachments
image003.jpg
image003.jpg
image002.jpg
image002.jpg
image001.png
image001.png
vimal82
1 Rookie
•
41 Posts
1604
0
Posted December 23rd, 2014 21:00
PPME is a bit scary as there is no fall back once committed.
Sent from my Android phone using TouchDown (www.nitrodesk.com)