DHCSTI

updated

10 years ago

D

DHCSTI

1 Rookie

•

48 Posts

0

8061

December 16th, 2016 10:00

Manually failover Unity NAS Server to other SP?

Is there a way to manually failover the Unity NAS Server (from SP A to SP B, or vice versa) without rebooting the SP?

It appears that just disconnecting the Ethernet ports does not cause the failover.  Would like to perform a test, similar to how we used to test data mover failover without impacting any block access.

Many thanks in advance.

  • DELL_ChrisHolloway

    2 Intern

    •

    125 Posts

    5994

    1

    Posted May 17th, 2019 04:00

    You can change the SP a NAS server resides on. There's a drop down in the NAS server properties to select the SP.
  • CBuhl

    33 Posts

    6300

    0

    Posted March 23rd, 2017 18:00

    I'm looking for the same thing.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    6300

    0

    Posted March 24th, 2017 13:00

    I dont think there is a way short of rebooting the SP

  • maniemc

    169 Posts

    6300

    0

    Posted March 25th, 2017 15:00

    Disconnecting network ports will not do the failover (which is why trunking is recommended for production).

    For any test/maintenance, the required SP should be set to maintenance/service mode (which does the reboot and failover the services to peer SP).

    However, in future code release, it will have this feature.

  • vivek_asml

    1 Rookie

    •

    30 Posts

    5992

    0

    Posted May 17th, 2019 04:00

    Thanks Chris, is this the same impact as an SP failover ?
  • vivek_asml

    1 Rookie

    •

    30 Posts

    5997

    0

    Posted May 17th, 2019 04:00

    Hi, is anyone aware of this functioanilty being released in current/future unity systems ? failover of NAS without SP reboot/failover. Many Thanks, Vivek
  • DELL_ChrisHolloway

    2 Intern

    •

    125 Posts

    5984

    1

    Posted May 17th, 2019 05:00

    IMO it would be similar to a managed/graceful failover between the two SPs rather than a catastrophic failover. 

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    5908

    0

    Posted May 24th, 2019 06:00

    IF you want to really test SP failover then you need to do a real failover - like rebooting the SP