for those who come across this post and has the same issue, I recommend trying Miminum to POST.
"The minimum configuration required for a Dell PowerEdge R610 to power on and successfully complete the Power-On Self Test (POST) is one CPU, one memory module, one power supply, and the left control panel with its cable. Removing all other components, including additional CPUs, memory DIMMs, drives, and expansion cards, will allow the server to boot up and complete POST"
( Please note the minimum configuration required for a Dell server to pass the Power-On Self-Test (POST) can vary depending on the server model.)
Chances are you may have a non Dell card, and by doing this, you can also isolate CPU or MoBo issues.
Respectfully,
(edited)
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Young E
Moderator
•
5421 Posts
•
37 Points
0
0
Posted May 22nd, 2025 02:48
Hello,
for those who come across this post and has the same issue, I recommend trying Miminum to POST.
"The minimum configuration required for a Dell PowerEdge R610 to power on and successfully complete the Power-On Self Test (POST) is one CPU, one memory module, one power supply, and the left control panel with its cable. Removing all other components, including additional CPUs, memory DIMMs, drives, and expansion cards, will allow the server to boot up and complete POST"
( Please note the minimum configuration required for a Dell server to pass the Power-On Self-Test (POST) can vary depending on the server model.)
Chances are you may have a non Dell card, and by doing this, you can also isolate CPU or MoBo issues.
Respectfully,
(edited)
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!