UNSOLVED
818
1
Posted February 19th, 2010 13:00
not sure if i understand what you are asking. Do you need to provision 4TB worth of storage but need to make sure that it resides on top of 400 spindles ?818
0
Posted February 19th, 2010 13:00
yes, i want to use my all spindle.
suppose i used 100 spindle for 1 TB ( makesure 1TB spreaded on all spindle) . i dont want to use it again.
what is the best way to spread the space.
i want to make sure i donot want add all device in thin pool and go with thin device.
818
0
Posted February 19th, 2010 14:00
Hi Dynamox,
I am goind to mark as a helpfull answer, expecting more discussions from you on this question.
should i have to configure my vmax in raid-1 intially to fulfill this requirement.
i am in LAB so can i can paly with it ( up to some limit
)
818
1
Posted February 20th, 2010 05:00
Sorry i posted couple of responses before..disregard them.Editing the same msg.
I am in the same boat as you.Did you get a chance to test it?
818
0
Posted February 22nd, 2010 10:00
Boom,
Sure..thought would be useful.see the other thread V-max Disk groups.It seems with the help of Bin file multiple disk groups can be created instead SMC(which is a product enhancement it seems).
If Bin file allows to create multiple disk groups,Thin/standard devices can be created from those and dedicate disks for specific purpose.
818
0
Posted February 22nd, 2010 10:00
I am going to test it in next 15 days. i will post you updaete once i will done.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
818
0
Posted February 19th, 2010 13:00