I'm trying to get the EMC adapter (version 4.0.168071) working with a VMAX in our environment. When I try to add a VMAX to the adapter, I give it:
A name
Management IP address with port :5988
Array ID
Set connection type of VMAX
Don't add in a license (as this is a trial)
Enter the valid credentials.
I get the error:
"Unable to establish a valid connection to the target system. error connecting to array."
When I change the port ID to :5989 I get the error:
"Unable to establish a valid connection to the target system. Wait for response of task 'Test connection' is timed out for collector "vRealize Operations Manager Collector vRealize Cluster node'".
ESA 4.0 no longer supports VMAX2 which would be your VMAX-1 and VMAX20K arrays. It will support, however, the VMAX100K which is a VMAX3. The last version of ESA to support VMAX2 and VMAX3 is version 3.5. Just a reminder that ESA 3.5 uses SMI-S and requires that all arrays are seen as Local, not Remote.
As Zack notes you are attempting to use an SMI-S Provider when ESA 4.0 requires the Unisphere REST API. You need to put in the Unisphere for VMAX IP address. Check out this blog post for detail: ESA 4.0 and Unisphere for VMAX REST API |
WorldPolice
123 Posts
5337
0
Posted June 9th, 2016 06:00
ESA 4.0 no longer supports VMAX2 which would be your VMAX-1 and VMAX20K arrays. It will support, however, the VMAX100K which is a VMAX3. The last version of ESA to support VMAX2 and VMAX3 is version 3.5. Just a reminder that ESA 3.5 uses SMI-S and requires that all arrays are seen as Local, not Remote.