UNSOLVED

SeeingEyeIT

updated

3 months ago

S

SeeingEyeIT

10 Posts

0

6952

March 18th, 2019 12:00

SA-0145 Unable to add device

I get an email like this every day from my server: SupportAssist Enterprise is unable to add the device because the device credentials are incorrect, incomplete, or not provided.

But when I go to the server, I cannot fix it.  The device collection shows failure, but there is no place to enter credentials.

Is there a manual or human that can explain this?

  • RoosRafaela

    1 Message

    6272

    0

    Posted March 27th, 2019 05:00

    Hi  I also have the same problem for weeks. Tried many things without results. And there is almost no response from Dell or whatsoever.

  • DELL-Stefan R

    Moderator

    •

    790 Posts

    6230

    0

    Posted April 1st, 2019 02:00

    Hi guys,

    one question on this, how do you discover your systems? Are you using manual discovery or via an adapter?

    Regarding the missing or wrong credentials you maybe use a credential profile with wrong credentials, in this case, update the profile.

    Also check, that all your systems use the "correct" credentials, maybe there was a change on one or more systems.

    Cheers
    Stefan

  • 6220

    0

    Posted April 1st, 2019 13:00

    I too am , Unable to add device and would just like to delete it from Staging with no luck.

    Please advise!

    Doug Ritzke

  • DELL-Stefan R

    Moderator

    •

    790 Posts

    6193

    0

    Posted April 3rd, 2019 07:00

    Hi Doug,

    did you check the things I mentioned above?

    Would be nice to know :)

    Cheers
    Stefan

  • Corellan

    10 Posts

    4989

    0

    Posted June 13th, 2019 12:00

    I am also getting this error, though it's for a device that has already been added. The device's status is "Failed", and the error code along with SA-9000 appear on the device details flyout panel. Some form of communication is working, because SA Enterprise was able to query the OS version, model, service tag. I was able to remotely install OMSA and SNMP (both of those were already installed, but SA Enterprise tried anyway and reported success).

    This error appeared after I installed "Dell EMC iDRAC Service Module Intaller for OS DUP, v3.4.0". Prior to installing that, I was troubleshooting much the same issue except that the error I was given was SA-9025.

     
  • Corellan

    10 Posts

    4987

    0

    Posted June 13th, 2019 12:00

    Quick update.

    I deleted the device and created it again. This time I am not getting SA-0145, but am getting SA-9025 again. It seems my issue is off-topic in this thread.

  • DELL-Stefan R

    Moderator

    •

    790 Posts

    4953

    0

    Posted June 17th, 2019 01:00

    Hey there,

    I guess this is already known, but the manual mentions this:

    SA-9025 SupportAssist Enterprise is unable to run the script file because of one of the following:
    1 You may not have superuser privileges on the system.
    2 You have not entered the Management Server IP address.
    3 Network sharing might be disabled.
    
    Perform the following:
    1 Ensure that you have superuser privileges on the system.
    2 Enter the Management Server IP address.

    Maybe this is a help?

    Stefan

  • vDEV9999

    1 Rookie

    •

    4 Posts

    4500

    0

    Posted August 15th, 2019 20:00

    We aren't using the credential profile and also I have verified that the credentials are correct. I think, you are referring to discovery in the openmanage. How to check if the device discovery is set manual or via adapter in the openmanage? I can see that the device on which we have encountered this has completed discovery.

  • DELL-Stefan R

    Moderator

    •

    790 Posts

    3327

    0

    Posted August 16th, 2019 00:00

    Hi,

    manual discovery means, in SupportAssist Enterprise you go to the Devices pane and click the add device button. Via adapter, well, in this case, check the Extensions tab and manage your adapters, if you have one there, you discovered the systems via an adapter.

    Cheers
    Stefan

     

  • cwolfaardt10

    1 Message

    1060

    0

    Posted September 17th, 2019 19:00

    Hi Stefan R,

    I have:

    1. Removed and re-added the Account Credentials
    2. Removed and re-added the Credential Profile
    3. Changed the password for the iDRAC tested but didn’t work so changed it back to what it was
    4. Repaired the installation of SAE

    Still getting the same error message.  I can confirm the username and password I am using does work logging into the iDRAC.