0

3844

June 24th, 2019 04:00

Cannot protect Vms

Hi all,

 

I installed the very latest version of RP4VM 5.2SP2 but I cannot protect the VM's through the plugin console.

At the end of the process I have this pop-up error :

"INTERNAL_ERROR"

Everything is green...

Cannot see anything in the logs also.

Any Idea ?
Thank you

  • Idan

    4 Apprentice

    •

    675 Posts

    3371

    2

    Posted June 27th, 2019 04:00

    Bingo - please upgrade the plugin via the plugin help menu. Then logout and log into the web client and verify that the plugin is also running 5.2.2.

    Finally, retry protection.

     

    Regards,

    Idan

  • eKonkursy

    1 Message

    3441

    0

    Posted June 24th, 2019 06:00

    I have very similar problem, any advices?

  • Idan

    4 Apprentice

    •

    675 Posts

    3430

    0

    Posted June 24th, 2019 11:00

    It depends on a number of reasons but I would start with powering on the VM(s) to be protected, granted it's powered off.

     

     

  • 3422

    0

    Posted June 25th, 2019 02:00

    Hi Idan,

     

    VM's are Powered on.

  • Idan

    4 Apprentice

    •

    675 Posts

    3418

    0

    Posted June 25th, 2019 02:00

    Patrick,

    Make sure that the plugin is running the same version as the vRPAs.

    Feel free to contact me offline or further troubleshoot.

     

    Regards,

    Idan

  • 3391

    0

    Posted June 26th, 2019 09:00

    Hi Idan,

    Sorry for the late reply.

    I installed vRP4VM 5.2SP2 m.128

    Splitters version on the 8 nodes of the Vsphere Cluster is : RP-Splitter RPESX-00.5.2.2.0.0.m.128.000 EMC_Recoverpoint PartnerSupported

    If I check the plugin version in the "Help" section I have 

    RecoverPoint for VMs Plugin version 5.2.0.3 (a.412)

    Regards

  • hicalls

    4 Posts

    2851

    0

    Posted September 20th, 2019 00:00

    Thanks Bro, you saved my RP4VM environment. Just in case which have same problem, just login to your vCenter Server via vSphere Web Client then pointing to RecoverPoint for VM Plug in. - On Dashboard you can see on the right top see "Help" Option - About - Upgrade - Choose the latest Plugin version which is 5.2.2.0. - Logout from vSphere Web Client - Then login again and check on VM want to replicate until finish. - Voila ! Cheers !