
UNSOLVED
Dell Precision 5530 imaging issues
I need help with an issue I am experiencing with my Precision 5530. After receiving the laptopswe proceed to install an enterprise edition of Windows 10 LTSC. I use the UEFI option to install the OS and everything works great. When done creating the image to capture and set it up the way we need it, we use Ghost 3.1. Once I boot to Ghost (using the UEFI boot method) I am prompted to select the partition to install the image. And here is where I run into issues. Ghost only sees the USB I am using to boot Ghost as the only available partition to restore or capture the image. It is almost as if using the UEFI boot method hides the laptop partitions. Also I am disabling the secure boot option just to make sure that it works. I have used the legacy boot but installing a new OS using this method is a nightmare (and also, it doesn't work - same issue). Can I please get any suggestions/guidance/advice on how to deal with this?
thanks.
Responses (1)
Solutions (0)

speedstep
11 Legend
•
46969 Posts
1836
0
Posted May 31st, 2019 09:00
Neither Dell nor Microsoft support 3rd party software like Ghost.
Ghost will not see any drives if the mass storage drivers for NVME and or INTEL RST, Chipset, USB3 etc are not there.
LSI SAS 2308/9217 Controller Driver
DellVersion: A00
VendorVersion: 2.00.66.02
DellVersion: A00
VendorVersion: 2.00.66.02
No Change
Intel Rapid Storage Technology enterprise Driver and Management Console
DellVersion: A03
VendorVersion: 5.3.1.1019
DellVersion: A03
VendorVersion: 5.3.1.1019
No Change
Intel Rapid Storage Technology Driver and Management Console
DellVersion: A02
VendorVersion: 15.2.2.1030
DellVersion: A02
VendorVersion: 15.2.2.1030
No Change
Intel Rapid Storage Technology enterprise Driver and Management Console
DellVersion: A01
VendorVersion: 5.2.0.1215
DellVersion: A01
VendorVersion: 5.2.0.1215
No Change
Intelr Rapid Storage Technology Enterprise F6 Driver
DellVersion: A00
VendorVersion: 4.3.0.1198
DellVersion: A00
VendorVersion: 4.3.0.1198
No Change
LSI 3008 Drivers for Windows 8.1 - 64 bit
DellVersion: A00
VendorVersion: 2.50.75.01
DellVersion: A00
VendorVersion: 2.50.75.01
No Change
Intel Rapid Storage Technology Driver and Management Console
DellVersion: A09
VendorVersion: 12.9.0.1001
DellVersion: A09
VendorVersion: 12.9.0.1001
No Change
Intel Rapid Storage Technology Driver and Management Console
DellVersion: A00
VendorVersion: 14.5.2.1088
DellVersion: A00
VendorVersion: 14.5.2.1088
No Change
Intel Rapid Storage Technology Driver and Management Console
DellVersion: A01
VendorVersion: 16.0.2.1086
DellVersion: A01
VendorVersion: 16.0.2.1086
No Change
LSI 9440-8i/9460-16i drivers for Windows 10 - 64 bit
DellVersion: A01
VendorVersion: 7.702.12.0
DellVersion: A01
VendorVersion: 7.702.12.0
No Change
https://www.dell.com/support/article/us/en/04/sln312414/dell-command-deploy-driver-packs-for-enterprise-client-os-deployment?lang=en
You have to download the single cab files then extract them using 7zip so that windows can "see"
If extracted into the documents folder for all users it will not need to be online to see things.
WinPE - CAB Availability (follow the links for CAB details and to download)
https://www.7-zip.org/download.html
WinPE 10
A11 (04/30/2019)
NONE of the new Dell models support Legacy Boot.
GPT UEFI is required now as is 64 bit os.
Starting from Ghost Solution Suite3.0HF2,Symantec Ghost Solution Suite supports Windows 10 with limitations
https://symwisedownload.symantec.com//resources/sites/SYMWISE/content/live/DOCUMENTATION/9000/DOC9010/en_US/Windows10_fullsupport_statement_GSS.pdf