We have a MD3000i. Several months we added a new drive to the array, thinking thata it would be added to one of the existing disk groups. However it was added as a 'Free space' group. See the attached picture:
I would like to add the 'Free capacity' above to either 'Main-Raid-5' or 'Extra-Raid-5'. How do I do that?
I am not sure which version of firmware that your MD3000i is currently at so here are the 2 users guides each for the different firmware. If you look on the pages #’s that is listed for each users guide it tell you how to add the space to your disk group.
However this free drive has already been assigned to a disk group named Free Capacity (see screenshot). When I try to delete it, (to make it unassigned and free capacity) the Delete button is grayed. There is no data on that drive so I would like to delete the assignment and add it to an existing disk group as Free Capacity described on p 62 in the manual.
How do I delete the screenshot's Free Capacity disk group or why is the delete button grayed out?
DELL-Sam L
Community Manager
•
8150 Posts
•
34715 Points
1188
0
Posted January 16th, 2014 12:00
Hello IKT,
I am not sure which version of firmware that your MD3000i is currently at so here are the 2 users guides each for the different firmware. If you look on the pages #’s that is listed for each users guide it tell you how to add the space to your disk group.
Users guide for firmware 07.xx.xx.xx page 62
ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000i_User%27s%20Guide20_en-us.pdf
Users guide for firmware 06.xx.xx.xx page 62
ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000i_User%27s%20Guide19_en-us.pdf
Please let us know if you have any other questions.