Where can I find the specifications for the various PERC controllers available on the 2850? I can't seem to find anything on the Dell site. Specifically, I'm wondinering if the PERC4ei is dual-channel. I'm considering using this for a SQL server, with a RAID 1 array on the first channel (for boot & transaction logs), and RAID 5 w/4 drives on the second channel (for data). But I want to make sure the controller is dual-channel, or do I need to step up to the PERC4DC? Thanks for any help :-)
Thanks for the info! The specific model I'm looking at (the PERC4ei -- on the 2850 rack-mount server) was not mentioned in those docs... most models contain an 'S' for single-channel, and a 'D' for dual-channel, but the 'ei' doesn't seem to indicate anything other than that it is embedded. Are the two channels both channels internal? Because that second bit of info seems to indicate otherwise when it mentiones 'the internal channel'. I'd like to use one channel for the media bay and one for the backplane. If it can do this, then I'm all set. Thanks again for the help!
"The DellTM PowerEdgeTM Expandable RAID Controller (PERC) 4/Di/Si and 4e/Di/Si are embedded subsystems on the motherboard that offer RAID control capabilities. The RAID controller supports all low-voltage differential (LVD) SCSI devices on Ultra320 and Wide SCSI channels with data transfer rates up to 320 MB/sec. PERC 4/Si and 4e/Si support a single channel, while PERC 4/Di and 4e/Di support two channels."
An integrated, dual-channel U320 SCSI host adapter. The internal channel supports up to ten SCSI hard drives using the 1x8 and 1x2 SCSI backplanes. The SCSI backplane automatically configures SCSI ID numbers and SCSI termination, greatly simplifying drive installation.
Optional ROMB activated by using a ROMB key, a 256-MB DDR2 400 memory module, and a RAID battery.
Oops!, I posted the links to the PE2800. The 2850 has the 4e/Di
"Support for up to six 1-inch, internal U320 SCSI hard drives (with hot-plug capability when using the optional RAID capability). An optional daughter card provides support for a split backplane."
That answers everything -- thanks again for your help. Would be nice if they listed the info right on the order page like they do for the PERC4/DC -- "2 Internal Channels, 0 External Channels". Maybe you could pass that suggestion along. I'm off to place my order...
smadavid
6 Posts
248
0
Posted June 21st, 2005 20:00