Solved!
Go to SolutionTrying to setup multiple default routes between two N4064F at two different locations
Office has N4064F layer 3 setup with default gateway to the firewall on VLAN10 to the Internet
Datacenter has N4064F layer 3 setup with default gateway to the firewall on VLAN120 to the Internet
Recently added a PTP Fiber connection between Office and Datacenter on Port 10 with VLAN1051
I then setup static routes so that all LAN data is routed over the Fiber and that's working fine, before it was all done over site-site IPSec tunnels over the firewalls
I am trying to setup a backup default route for the internet to go out the Fiber and not the DIA at the office and I am having trouble
I tried to change the Office switch default route to point to 0.0.0.0 0.0.0.0 172.16.120.3 (which is the datacenter's default route) but this is wrong
Office N4064F
Default Gateway is 172.16.10.3
S *0.0.0.0/0 [1/0] via 172.16.10.3, 04h:45m:02s, Vl10
C *10.0.51.0/30 [0/0] directly connected, Vl1051
C *172.16.10.0/23 [0/0] directly connected, Vl10
C *172.16.14.0/23 [0/0] directly connected, Vl14
C *172.16.18.0/23 [0/0] directly connected, Vl18
C *172.16.22.0/23 [0/0] directly connected, Vl22
C *172.16.26.0/23 [0/0] directly connected, Vl26
C *172.16.30.0/23 [0/0] directly connected, Vl30
C *172.16.34.0/23 [0/0] directly connected, Vl34
S *172.16.120.0/23 [1/0] via 10.0.51.2, Vl1051
system jumbo mtu 9216
ip http timeout-policy idle 300 life 86400
no ip redirects
ip routing
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
interface vlan 10
ip address 172.16.10.1 255.255.254.0
exit
interface vlan 14
ip address 172.16.14.1 255.255.254.0
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
exit
interface vlan 18
ip address 172.16.18.1 255.255.254.0
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
exit
interface vlan 22
ip address 172.16.22.1 255.255.254.0
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
exit
interface vlan 26
ip address 172.16.26.1 255.255.254.0
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
exit
interface vlan 30
ip address 172.16.30.1 255.255.254.0
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
exit
interface vlan 34
ip address 172.16.34.1 255.255.254.0
ip helper-address 172.16.10.13 dhcp
ip helper-address 172.16.10.14 dhcp
exit
interface vlan 1051
ip address 10.0.51.1 255.255.255.252
exit
ip route 0.0.0.0 0.0.0.0 172.16.10.3
ip route 172.16.120.0 255.255.254.0 10.0.51.2
Datacenter N4064F
Default Gateway is 172.16.120.3
S *0.0.0.0/0 [1/0] via 172.16.120.3, 219d:07h:44m, Vl120
C *10.0.51.0/30 [0/0] directly connected, Vl1051
S *172.16.10.0/23 [1/0] via 10.0.51.1, Vl1051
S *172.16.14.0/23 [1/0] via 10.0.51.1, Vl1051
S *172.16.18.0/23 [1/0] via 10.0.51.1, Vl1051
S *172.16.22.0/23 [1/0] via 10.0.51.1, Vl1051
S *172.16.26.0/23 [1/0] via 10.0.51.1, Vl1051
C *172.16.120.0/23 [0/0] directly connected, Vl120
system jumbo mtu 9216
ip http timeout-policy idle 300 life 86400
no ip redirects
ip routing
interface vlan 1
exit
interface vlan 120
ip address 172.16.120.1 255.255.254.0
bandwidth 10000
exit
interface vlan 1051
ip address 10.0.51.2 255.255.255.252
exit
ip route 0.0.0.0 0.0.0.0 172.16.120.3
ip route 172.16.10.0 255.255.254.0 10.0.51.1
ip route 172.16.14.0 255.255.254.0 10.0.51.1
ip route 172.16.18.0 255.255.254.0 10.0.51.1
ip route 172.16.22.0 255.255.254.0 10.0.51.1
ip route 172.16.26.0 255.255.254.0 10.0.51.1
Once you have the core switch routing between VLANs, then I would work out to the other switches on the network. Since the core switch is performing the VLAN routing, there is really no need to have the other switches configured for routing. The other switches can be left as Layer 2 switches, with an IP Address assigned to one VLAN for management purposes.
DELL-Erman O
Moderator
•
2984 Posts
•
14874 Points
250
0
Posted October 10th, 2022 05:00
Hello, I can share this best practice document "Best Practices for Dell Networking
N4000 Series Switch with DCB Configured for iSCSI" https://dell.to/3RP9Jac
Other than that unfortunately we cannot support the configuration, we have Deployment Service that can be contracted for that. If you need that you could contact Sales for a quote.
Hope that helps!
DELL-Erman O
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!