I have a new 6224 that I am trying to download a config onto...
I am using WINAgents TFTP
I am able to upload a config just fine to the TFTP Server, but when I try to download the config to the 6224 I get: failed to transfer file. Unable to receive a packet from the client (Error Code A14800EA)
I have made sure that Access rights are given but I keep getting the above error...
One thing that I was thinking might be causing the problem is that the switch that I pulled the config from is on a different firmware than the new one...Would that cause the configs to fail to upload?
The config is from a switch running 1.0.0.27
I am trying to download it to a switch running 2.1.0.13
I ran into this thread trying to upgrade the firmware on a dell 6248 and got the same error message. I'm also using winagents tftp V4. I've done this upgrade a few years ago and had to do it through XMODEM because of that error too, so that took a very long time to transfer a 9mb file.
This time around, i was messing around with the winagents server options and there's an option in the general tab. Check the "Enable firewall support" in the TFTP Server Settings. To get there, Click on Server->TFTP Server Settings. I don't know why you have to check this button because my firewall was off to begin with anyway. who would've thought.....
This should allow you to transfer the firmware via TFTP and save a TON of time. Hope this helps for anyone else that runs into this problem.
TyLamb
13 Posts
1853
0
Posted September 18th, 2008 19:00
Just a thought but I recevied an error when I tried to tftp and it was the filename that was to long. I changed it from:
copy run tftp://10.10.10.10/xx.20080918.1700.dellSwitch
to:
copy run tftp://10.10.10.10/test
and it worked.
I don't remember the error number you posted though.