I finally got the monitor updated! I just had to plug a USB-A to USB-C cable into the regular USB-C port (not the Thunderbolt one) and keep an HDMI cable connected so the screen wouldn't go to sleep.
* What computer model? * List all of the ports on the unknown computer * List all of the U4025QW cables currently connected to the computer connecting to which ports on both
Run through these instructions and tell us what happens.|
* Download save the Windows OS M3T105 firmware to the computer desktop
* Disconnect every peripheral device from the U4025QW
* Connect like this = Lenovo x1 Carbon 13th Gen Thunderbolt 4 --> U4025QW Thunderbolt 4 1.5 M cable --> U4025QW #6 Thunderbolt 4 140W port (page 16)
* Open the Monitor OSD Menu * Go to Others * Go to Factory Reset and run it * Make sure DDC/CI is set to On * Exit the Menu
* Close/end task all unnecessary software applications (Browsers, Dell SupportAssist, Dell Update Application, Dell Display Manager, Dell Display and Peripheral Manager, Dell Color Management, Steam, Anti-virus, etc.)
* Right click the M3T105 firmware update file that you saved to the computer desktop * Click "Run as administrator" * Follow the prompts * When asked, restart the computer
Once the firmware update is done and the computer has restarted, do the following steps = * Turn the monitor off * Disconnect the power cable and video cable from the monitor. Wait 5 seconds * Reconnect the power cable and video cable to the monitor * Turn the monitor on
cccppp
1 Rookie
•
4 Posts
•
13 Points
0
0
Posted June 6th, 2026 16:54
I finally got the monitor updated! I just had to plug a USB-A to USB-C cable into the regular USB-C port (not the Thunderbolt one) and keep an HDMI cable connected so the screen wouldn't go to sleep.