1080p is a HDTV mode (1080 vertical lines using progressive scan).
Your LCD monitor is much higher res than a HDTV. WMV/MOV files will play fine because they are already in a digital format on your system, not coming from a HD tuner.
If the specs say the monitor doesnt support 1080p, it means it doesnt support that input mode on the component input or hdmi input, you can still support resolutions at or above 1080i or 1080p from digital sources already on your machine.
The post on hardforum does not confirm that 1080p HDCP is not supported. The way I understood the post was that the blu ray player he used relies on an EDID code from the monitor to determine what resolutions can safely be sent without causing damage. The poster states that the problem lies in the player relying on these EDID codes. Further through the post, they say that if devices (ps3 possibly?) have the option to force a resolution of 1080p then it should work.
Correct me if I'm wrong, but the update about the samsung blu ray player and EDID codes puts us back to uncertainty about whether the 2407 supports 1080p HDCP or not.
Max PC said it's HDCP compliant, tested with blu-ray and hd-dvd but, image was most likely down res'd to 720P as 2407 doesn't support 1080P like RadXGe said above.:)
Message Edited by all the facts on 09-22-2006 07:07 PM
480P dvd from standalone dvd player thru component input 2407 is 480I as it shows in the OSD of 2407.
I thought it would be 480P.
DVD player in PC shows up in the center of the screen as the dvd spec resolution it's in. 720x480
Yours looks like a PAL spec res. 720x576
If you expand it to full screen and it doesn't look as clear, it's still 1920 x 1200 but fuzzy because of VOB files and format the disc is produced in.
1080p is a HDTV mode (1080 vertical lines using progressive scan).
Your LCD monitor is much higher res than a HDTV. WMV/MOV files will play fine because they are already in a digital format on your system, not coming from a HD tuner.
If the specs say the monitor doesnt support 1080p, it means it doesnt support that input mode on the component input or hdmi input, you can still support resolutions at or above 1080i or 1080p from digital sources already on your machine.
thanks for that info, i was wondering about that. I find it good news :D
dwlovell
196 Posts
361
0
Posted September 21st, 2006 01:00