UNSOLVED

sligobob

updated

21 years ago

S

sligobob

14 Posts

0

8642

December 18th, 2005 15:00

P4 3Ghz running at 3.85Ghz

Hi
 
I have just noticed that my P4 3.0 Ghz dimension 5000 with BIOS A6 is reportedly running at 3.85Ghz.  I havent done anything to my system and it hasnt been at this speed before.  Anyone come accross this before?  Will if fry my processor?
 
Thanks
  • bob_c_b

    556 Posts

    196

    0

    Posted December 18th, 2005 15:00

    What is reporting that speed? BIOS or an application?
  • 196

    0

    Posted December 22nd, 2005 12:00

    Maybe Dell put the wrong processor in :smileyhappy:

    Its probably a case of your Dell thinking its a 3.8GHz rather then a 3.0GHz, then the actual 3GHz running at a speed of 3.8GHz.

    You should have no problems. Check in your Bios to see what processor registers there, that will at least prove if its hardware of software related.

    Message Edited by john ballistix ddr2 on 12-22-2005 08:48 AM

  • sligobob

    14 Posts

    196

    0

    Posted December 22nd, 2005 19:00

    The BIOS reported running at 3Ghz but windows XP Pro said 3.85, rebooted and it said 4.43, rebooted again and it said 4.38. 
    My system is dual boot so I booted into Windows server 2003 and that said 3.89.
     
    I logged it with dell through email and they just automatically replied with a load of things to check.
     
    The next day it was back to 2.99Ghz and has stayed the same since.
     
    I'd love to know what on earth was going on in my PC.
     
    Cheers
  • ravik521

    2 Intern

    •

    1560 Posts

    196

    0

    Posted December 22nd, 2005 21:00

    also, if it really were running at 3.85ghz instead of 3.0ghz your processor would probably be dead.
  • ravik521

    2 Intern

    •

    1560 Posts

    196

    0

    Posted December 22nd, 2005 21:00

    maybe something with the chipset driver?
  • 196

    0

    Posted December 23rd, 2005 20:00

    As long as your PC is working correctly, its obvious to know that your CPU is working correctly, and therefore you should have no worries.

    Its probably just a small software problem and nothing else. If your really concerned about it, seek further advice but be safe in the knowledge that there is no threat to your system. 

    You could at least show your mates a 4GHz Pentium 4 :smileyvery-happy: so to speak!

     

     

  • sligobob

    14 Posts

    196

    0

    Posted December 23rd, 2005 20:00

    well came home today and its back up to 4.11Ghz.  I rang Dell and went through all the usuall things in the BIOS and eventually she said that because the BIOS says 3Ghz that Window smust be wrong and she put me on to a Level 2 technician.

    He has told me to run windows update and then he will provide me with a list of MCE's to install.  I'm not familiar with these things but he says they are what Windows uses to communicate with the BIOS

     

    ????????