UNSOLVED

tlh18

updated

14 years ago

T

tlh18

15 Posts

0

218880

July 17th, 2012 14:00

Hard drive replacement in a Dell Dimension 5150/E510 floppy diskette seek failure/ no boot device available

i have a Dell Dimension 5150/E510 the hard drive went out so i got one off the internet and i installed it and when i went to install Windows XP first it comes up floppy diskette seek failure strike the F1 key to continue, F2 to run the setup utility, so i hit F! and then it says No boot device available-strike F1 to retry boot, F2 for setup utility how do i fix this so i can reload my machine

  • 1410

    0

    Posted July 17th, 2012 15:00

    Hi TLH18,

    Welcome to the Dell Community.
     I understand that you have  purchased a hard drive  and would like to install the OS.

    1. We need to ensure that the hard drive is detected by the computer. In order to do that.

    • Reboot PC
    • When the Dell Splash screen appears, press "F2" key 2-3 times.
    • A BIOS Utility Screen will appear(see picture below) 
    • Please navigate  in this utility by using these keystrokes
    Expand and Collapse Field.................................  or  left- and right-arrow keys or  <+>/<–>
    Select Field to change........................................
    Change a setting.................................................. Left- and right-arrow keys
    Cancel modification............................................
    Reset Defaults......................................................  or  Load Defaults menu option
    Exit BIOS................................................................  – Remain in Setup, Save/Exit, Discard/Exit
    • Please select the "Drives" option and press Enter
    • Select "Diskette Drive" and press Enter
    • Select the option "Off" by using the left or right arrow key  and press Enter
    • Select SATA 0  or PATA 0 (depends upon what hard drive  has been installed; SATA or IDE) and check if it is enabled or disabled. If disabled ( Off), please enable it (Select On) and press Enter
     -
    • Exit BIOS by pressing "Esc" and Select "Save/Exit".
    • Please try to install OS after following these steps.
    Please reply for further queries.
  • tlh18

    15 Posts

    1410

    0

    Posted July 17th, 2012 20:00

    i did what you asked and when i restarted  the message No boot devise available- strike F1 to retry boot, F2 for setup utility

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    1410

    0

    Posted July 17th, 2012 21:00

    Make sure both the data and power cables are plugged in. I've made the mistake in the past of not connecting one and then wondering why they device doesn't show up.

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    1410

    0

    Posted July 17th, 2012 22:00

    D'oh! No OS is installed!

  • Tom Green

    322 Posts

    1410

    0

    Posted July 17th, 2012 22:00

    Reboot and press F12 and select boot from CD/DVD and when it says press any key, press any key to boot the windows XP installer.

  • tlh18

    15 Posts

    1410

    0

    Posted July 18th, 2012 00:00

    i did all of those things you suggested and press any key never shows up it just says Selected boot device not available- strike F1 to retry boot, F2 for setup utility. i hit F1 and it just does it the same thing and gives the same responce. so what now

  • 1410

    0

    Posted July 18th, 2012 15:00

    Thank you for the response.

    I would request you to go to BIOS setup utility by pressing F2 on Dell Splash Screen and check Drives. Please look for drive details on this screen and check if there is anything displayed next to DRIVE ID and CAPACITY.

    Please let me know if the hard drive that you have purchased is a SATA or an IDE hard drive.

    If it is an IDE drive, you could connect the hard drive to the secondary port on the IDE ribbon cable that is used for DVD drive.

    The system has 2 SATA ports, you could also try to connect the hard drive on the  2nd SATA port.

    As you see in this diagram, there are 2 SATA port connector, please try to  connect the hard drive  on the second SATA port and check in

     BIOS whether it is detected or not

    Please try these steps and let me know of the outcome

     

  • tlh18

    15 Posts

    1410

    0

    Posted July 18th, 2012 17:00

    Drive 0:  on , controller details: * Controller =Serial ATA,*Port = SATA-0

    Driver Details: * Drive ID ST380013AS, * cAPACITY = 80GB, BIOS = THIS DRIVE IS CONTROLLED BYTHE SYSTEM BIOS, *Link Speed = Unknown

    What do I do next

  • tlh18

    15 Posts

    1410

    0

    Posted July 18th, 2012 17:00

    the hard drive is a SATA

                      New                                                                                  OLD

    Seagate: Barracuda 7200.7 80 Gbyte                                          Seagate: Barracuda 7200.7 80Gbyte

    Model: ST380013AS                                                                     Model: ST380013AS

    S/N: 3JV8ZD6S                                                                             S/N: 5MR1P6DG

    P/N: 9W2812-301                                                                         P/N: 9W2812-633

    HDA P/N: 100275523                                                                   HDA P/N:100355438

    Config:SYY-06                                                                              Config: D14J-02

    Firmware:3.18                                                                              Firmware: 8.12

    Date Code: 04302                                                                        Date Code: 06023

    Site Code: AMK                                                                            Site Code: WU

    I replaced the Ultra ATA Data Cable (Ribbon)

  • rdunnill

    8 Professor

    •

    8811 Posts

    •

    35254 Points

    410

    0

    Posted July 18th, 2012 18:00

    You should be able to boot from the Windows installation DVD and install Windows, which will allow you to boot from the drive.