UNSOLVED

DLuedeman

updated

19 years ago

D

DLuedeman

19 Posts

0

8868

March 28th, 2008 00:00

Connect PC to TV??

Been doing some searches am just wondering the best option for me to connect my PC to TV.  I have the XPS with 8800GTX and I want to connect it to my 64" Samsung DLP.  The TV has both a HDMI input or a DVI PC In Input.   I am only running one monitor out of my PC at the momemt.   Would it be best to use the other DVI out on the videocard and run that to the TV---DVI to DVI or DVI to HDMI??  Will I carry over all sound and will the picture display correctly on my TV?   Just wondering if anyone has done this and can give me some advice.  Thanks
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    294

    0

    Posted March 28th, 2008 01:00

    DLuedeman,

    The video card DVI will only send video. You will have to run sound from the PC sound card Line Out to the TV.


    DELL-Chris M (old account)

    #IWork4Dell

  • tolstoy143

    209 Posts

    294

    0

    Posted March 28th, 2008 04:00

    I am typing this on a XPS 420 connected to my Samsung LN-T4071 LCD HDTV via DVI-HDMI cable and optical SPDIF for audio.  Wireless keyboard and mouse off course, too.

     

    You just need to make sure your video card does HDCP and preferably presets for 720p or 1080p. My ATI 2400HD automagically configured itself for my TV.

  • DLuedeman

    19 Posts

    294

    0

    Posted March 28th, 2008 06:00

    What are you using for your HDMI/DVI and SPDIF cables?  I am going to need a length of around 25 ft?  Will this degrade the quality of my signal?  What lengths are you using?  Thanks
  • Koeven

    2 Intern

    •

    140 Posts

    294

    0

    Posted March 29th, 2008 04:00

    I just recently turned my XPS Gen5 into a dedicated Media Center PC and connected it to a 1080P Samsung that has 3 HDMI inputs and an analog PC input.  I first tried using my GeForce 8600 GTS card with a DVI to HDMI cable and 2 channel analog audio from my SB sound card - as that was the only audio output the TV would accept.  It worked ok, but the picture didn't fill the screen fully no matter what setting I used.  I did some research and determined that the ATI cards had true HDMI output (including 5.1 digital sound).  I bought an ATI 2600 Pro, which has DVI connectors.  In order to get the HDMI with digital sound to work, you MUST use the ATI DVI to HDMI adaptor.  A standard DVI to HDMI converter, or cable will NOT work.  The ATI DVI to HDMI adaptor plug acts as a switch that triggers the card to also output the 5.1 sound.  You may need to dig around to find the correct sound drivers - if not provided by your card manufacturer (it uses a RealTek driver).  I'm now very satisfied with both the picture and sound and I'm pretty picky.  I've been using it to watch movies on Netflix online and Hulu and using it as a DVR with my Directv non-DVR receiver.

     

    You can find 25, 32 and 50 ft HDMI cables - be sure and buy them online - they're too expensive at any store and you can find good ones for 1/5 the price online.  With a good HDMI 1.3 cable you'll get no degradation of signal even on these longer runs.  (I just found a good 32 foot cable for $39.99)

     

    XPS 420, Intel Core2 Q6600, Vista Ultimate (SP1), 3GB RAM, 2x500 GB WD 7200 RPM SATA HDD (RAID 0), X-Fi Xtreme Audio, GeForce 8800 GTS 640MB, ATI Theater 650 Pro, UltraSharp 2407WFP

    Message Edited by Koeven on 03-28-2008 10:19 PM