UNSOLVED

Ravenwjf

updated

16 years ago

R

Ravenwjf

17 Posts

0

4797

January 5th, 2011 09:00

Dell Driver or ATI CCC driver

I am wondering which driver I should be using for my graphics cards (Dual ATI 5870's).  I ran the 3Dbench test and I got a 14,321 ( I have seen people post that they have gotten 21,000 scores) score and it called out a bad driver......and that it wasn't FM compatible.  So, should I reinstall the driver from the Dell Support page even though its dated from September, or should I be using the latest Catalyst from the ATI site?  Not sure what I can do to improve my graphics.

  • C_ronic

    431 Posts

    658

    0

    Posted January 5th, 2011 11:00

    5870s? are they mobile or normal? what benchmark are you using?

  • Cydonia

    18 Posts

    658

    0

    Posted January 5th, 2011 11:00

    Stay with the Dell drivers for 5870 from their drivers and software page (for now at least). Download and run GPU-Z . Be sure that the PCI-E is running at 16x for both cards. Also check the GPU BIOS and update if needed. If GPU-Z shows either PCI-E running at 8x, then follow the proceedure posted by Tesla: Troubleshooting Dual Video Cards in X-58 based AW Desktops Worked for me, hope it helps you.

  • Ravenwjf

    17 Posts

    658

    0

    Posted January 5th, 2011 11:00

    Sorry, I guess I should have stated that they are the mobility 5870's in my M17X-R2..  I ran the 3Dmark06, and that is what called out a bad driver.  My GPU bios is the latest of the Dell site, and I am using the 10.12 driver from ATI, not the drivers from Dell.  I am wondering if I should go back to the Dell drivers.

  • Cydonia

    18 Posts

    658

    0

    Posted January 6th, 2011 06:00

    I would try a clean install of the Dell driver anyway, cant hurt anything and you know youre using their recommended driver. Might be able to upgrade the driver once you are 'up to speed'.