Solved!
Go to SolutionN
nvazquez13
1 Rookie
•
3 Posts
0
21333
July 12th, 2017 15:00
How to get Node Firmware version in isilon OneFS 8.0.1.1
Just for a quick consultation, I have a OneFs 8.0.1.1 and I want to check the Node Firmware version?
The application of IsilonAdvisor_2.8.0 does not show it
Do you know the CLI command to see the version?
thanks
Noe Vazquez.
Peter_Sero
6 Operator
•
1169 Posts
15463
1
Posted July 13th, 2017 02:00
isi upgrade firmware devices
pre-8.0 it used to be isi firmware status
hth
-- Peter
nvazquez13
1 Rookie
•
3 Posts
15462
0
Posted July 13th, 2017 08:00
I do not see the node firmware version?
Should not display something like "node Firmware version 9.3.5"
Or is it within another concept?
Thank you, I had already executed that command, for the moment what we have
To confirm is the check-pre-upgrade that supports EMC (output log).
But passing the emc_advisor warns that there is an outdated node firmware, but we need to stay in version 9.3.5.
# isi upgrade firmware devices
Device Type Firmware Mismatch Lnns
---------------------------------------------------------------------
QLogic-NX2 10GigE 7.13.0 - 1-9
BMC_S2600CP BMC 1.25.9722 - 1-9
CFFPS2 CFFPS 03.03 - 3
CFFPS1 CFFPS 02.02 - 1-2,4-9
CFFPS1 CFFPS 03.03 - 3
CFFPS2 CFFPS 02.02 - 1-2,4-9
CMC_HFHB CMC 02.05 - 1-9
CMCSDR_Honeybadger CMCSDR 00.0B - 1-9
Lsi DiskCtrl 20.00.04.00 - 1-9
LsiExp1 DiskExp 0910+0210 - 1-9
LsiExp0 DiskExp 0910+0210 - 1-9
IsilonFPV1 FrontPnl UI.01.36 - 1-9
Mellanox Network 2.30.8020+ISL1090110018 - 1-9
LOx2-MLC-YD Nvram rp180c01+rp180c01 - 1-2,4-9
LOx Nvram rp180c01+rp180c01 - 3
---------------------------------------------------------------------
Total: 15
# perl RPSisiHealth 8.0.1.1 -u
EMC Remote Proactive Health Check 0.1146
Live Cluster Analysis Thu Jul 13 15:11:03 2017
Current OneFS Version 8.0.1.1
OneFS Version PASS
Upgrade Status PASS
Memory PASS
Drives Health PASS
Node Firmware (9.3.5) PASS
Node Compatibility PASS
SmartConnect Service IP PASS
UPGRADE MAY PROCEED
Hi nvazquez,
The commands provided already are correct. If you would like further verification, you can check the firmware versions listed for each device with the device list in the release notes for 9.3.5.
https://support.emc.com/docu84897Do you want to know if node fw 9.3.5? If yes then try this command since it's a patch. It's best practice to delete the node fw patch after upgrading node fw.
Just load the latest node fw 9.3.5 and run following commands:
OneFS 7.x
# isi pkg info
# isi firmware status (look for *, * means that fw is outdated)
OneFS 8.x
# isi upgrade patches list
# isi upgrade firmware devices (look for true, true means that fw is outdated)
nvazquez13
1 Rookie
•
3 Posts
15463
0
Posted July 14th, 2017 07:00
Thanks I found the solution, emc should think about having a specific and simple py command to consult this version:
Run through CLI:
Isi upgrade patches install IsiFw_Package_v9.3.5.tar
Look at the graphical interface and in the menu of patches and firmware and after this command appears that the package "Patch Name
IsiFw_Package_v9.3.5 "
I see that they have rushed the closing of this consultation
Without more, thanks to those who contributed
DOC
https://support.emc.com/docu84897_Isilon-Node-Firmware-Package-9.3.5-Release-Notes.pdf?language=en_US
page 9