cyrille_b_1974

updated

5 years ago

C

cyrille_b_1974

1 Rookie

•

15 Posts

3

24511

July 28th, 2021 22:00

G15 5511 external display on usb-c DP & bios upgrade

Hello,

I got a G15 with a i7 11800H and RTX3060

I got it a few days ago and connect it to an external dell 2415 displya via a usb to DP cable by at dell at the same time of ly laptop

It worked perfectly until two days ago

At that time dell update upgrade my bios to 1.4.2 version

Yesterday when i boot it up the external display done not work any more

It did n't appear in nvidia, .intel or windows

(in nvidia physix the DP do not appear anymore. Before update it shows dp+hdmi+integrated screen   but since the flash only hdmi and integrated displays are shown)

but when plug or unplug the laptop make a sound. So it is somehow recognise a bit.

I try connecting the display to another computer vi dp/usb-c and that work so the screen and cable are correct

I also try to siwitch in bios the hybridgraphics mode ... no change

And to finish the display work perfectly on hdml

 

When bios flash was done a message said briefly that TBT flash fail

I think TBT is tunderbolt so it is the hardware on witch the usb-c port is connected

but dell update seem to think that flash of bios is ok (bios says he is in version 1.4.2 so it seems at least partially flashed)

 

How can i gen my connection via usb-c to screeen fonction back  ?

 

In advance, I thanks you for your interest

cyrille

  • Hank-tw

    1 Message

    12682

    4

    Posted August 27th, 2021 20:00

    fixed!
    I share how I fixed this problem:

    我有和樓主有相同的問題,後來朋友告訴我用下面的方法,真的有效!
    分享給世界各地有這問題的好友試試!

    ★ the following just for  Dell G15 5511 BIOS 1.4.2 and NVIDIA GeForce RTX 3050/3050Ti/3060/3070/3080 ONLY!

    1、install  VBIOS_Flash.exe  from dell.com,and restart pc.

    https://dl.dell.com/FOLDER07569580M/2/VBIOS_Flash_ZPE.exe

    2、uninstall NVIDIA driver、NVIDIA HD audio、NVIDIA PhysX 、 NVIDIA …and restart pc.
    3、install NVIDIA GeForce RTX driver from dell

    https://dl.dell.com/FOLDER07335974M/1/NVIDIA-GeForce-RTX-Series-Graphics-Driver_DK4JM_WIN_27.21.14.6236_A01.EXE

    4、restart pc.  your external display should re-work again !

    吉祥如意!

  • ParabolaR

    7 Posts

    9908

    0

    Posted August 20th, 2021 09:00

    3 days ago I got the Dell G15. I have tried it through Dell Dock WD15 and Dell DA300, only monitor is not supported, it is working for other things very well.  

  • cyrille_b_1974

    1 Rookie

    •

    15 Posts

    9897

    0

    Posted August 20th, 2021 12:00

    mine has gone to repaire center. And now displays works again thru DP.usbc

    Waiting for support to say me precisely want they to to make it work

    before the reparation bios says it was 1.4.2 but windows reports 1.3.3 version

    now windows also say 1.4.2

    maybe part of the firmware update gone bad? 

    I will had the answer here when i'll get it

     

    cyrille

  • Phrawst

    13 Posts

    9878

    0

    Posted August 21st, 2021 10:00

    Also suffering from the exact same problem on the same hardware. Updated the bios and USB-C DP alt mode doesn't work.

  • OrangeBeard

    13 Posts

    9860

    0

    Posted August 21st, 2021 17:00

    Anyone try the 1.6.0 BIOS release to see if that fixes the issue?

    what about downgrading to a previous bios release? Is that supported on this model?

    any others find a workaround that solved the problem for them?

    thx!

  • Phrawst

    13 Posts

    9843

    0

    Posted August 21st, 2021 18:00

    I don't see a 1.6.0 bios for this model on its drivers and support page. 

  • cyrille_b_1974

    1 Rookie

    •

    15 Posts

    9832

    0

    Posted August 22nd, 2021 00:00

    Hello,

    I don't see 1.6 bios either 

    Mine had the problem but is now working (1.4.2 bios). It goes to dell repair center and is now working. I'm waiting for some explaination of what they done. Will tell you here when i'll got informations

  • 9799

    0

    Posted August 24th, 2021 00:00

    Same problem. Got laptop today. TBT works fine. Update bios, TBT no longer displays.

  • 9780

    1

    Posted August 24th, 2021 18:00

    Things support has had me try

    No work so far. The team in the PMs said they are going to involve the engineering team for review.

    Nothing like the recommended bios update killing your laptops thunderbolt port on the day you buy it!

  • Phrawst

    13 Posts

    9769

    0

    Posted August 25th, 2021 08:00

    Appreciate you posting all the follow-ups. My experience with their support has been:

    - Over a half dozen calls and hours wasted trying to explain this issue, getting bounced between customer care and tech support.

    - Being told a replacement is "being proposed". I made these calls last weekend and I have yet to be informed of any movement on this issue.

    - An insane number of hours of my time and money spent trouble shooting this problem and trying to solve it because their support team is basically incompetent. 

    Why is their no process on their end to be able to track known issues, what is being done to resolve them and what the ETA on the fix might be. I'd be fine just keeping my unit if I was told a bios update to resolve the problem was around the corner.

    Fraking ridiculous they release a new product and brick a core feature within weeks.