We need to Migrate 7.5 TB from the CX700 to DMX 4. I am planning to use SAN Copy to copy the data from Source array to target array. Source servers are windows cluster i see 22 data devices given to them from CX 700 and 1 device whic is of size 0.5 GB (quorum drive) given from CX 700. So do i need to migrate this 0.5 gb quorum drive with the remaining 22 data devices using SAN Copy to the target DMX . We have already build new servers on the target side. Please clarify regarding this.
It depends on if you are migrating the hosts. If you are migrating the cluster (the nodes as well as the configuration) then yes you will need to migrate the quorum as that contains the cluster configuration database. SANcopy is a good choice for this move and can be done incrementally with a large bulk copy with the hosts online, and then a final incremental synch with the hosts offline.
If you are not migrating the hosts and will be building a new cluster using the data LUNs from the cluster, then just migrate the LUNs and mask them to the new hosts to build the new cluster.
AranH1
2163 Posts
1341
1
Posted May 27th, 2010 12:00
It depends on if you are migrating the hosts. If you are migrating the cluster (the nodes as well as the configuration) then yes you will need to migrate the quorum as that contains the cluster configuration database. SANcopy is a good choice for this move and can be done incrementally with a large bulk copy with the hosts online, and then a final incremental synch with the hosts offline.
If you are not migrating the hosts and will be building a new cluster using the data LUNs from the cluster, then just migrate the LUNs and mask them to the new hosts to build the new cluster.