UNSOLVED
J
julianvan_64cce1
12 Posts
0
838
August 3rd, 2007 22:00
problem about hpux connnect to cx400
I have a hpux that already connected to hp va array and eva array.Switch is hp OEMed brocade,no zoning is configured.A new CX400 is connnected to switch, and hpux can discover all the luns,everything seems ok.
there is the problem:
We changed the share memory size for app,then reboot. hpux can not boot up after 2-3 hr, and stoped at "VxVM starting in boot mode...". when we disconnect the cx400,hpux boot normal.
No separate HBA used to connect different arrays,HBA is A6795A.
HEAT is been checked, no specail issue is founded.
"HBA Driver is B.11.11.09"
" NOTICE : Fibre Channel Mass Storage Patch patch PHKL_28984 is installed on this host.
NOTICE : Fibre Channel Mass Storage minimum patch requirement PHKL_22874 is met. (Latest patch is PHKL_34161.)
NOTICE : SCSI IO Subsystem Cumulative Patch patch PHKL_23666 is installed on this host.
NOTICE : Latest PHKL_23666 SCSI IO Subsystem Cumulative patch is installed.
NOTICE : SCSI IO Cumulative Patch patch PHKL_30510 is installed on this host.
NOTICE : SCSI IO Cumulative minimum patch requirement PHKL_29047 is met. (Latest patch is PHKL_34815.)"
there is the problem:
We changed the share memory size for app,then reboot. hpux can not boot up after 2-3 hr, and stoped at "VxVM starting in boot mode...". when we disconnect the cx400,hpux boot normal.
No separate HBA used to connect different arrays,HBA is A6795A.
HEAT is been checked, no specail issue is founded.
"HBA Driver is B.11.11.09"
" NOTICE : Fibre Channel Mass Storage Patch patch PHKL_28984 is installed on this host.
NOTICE : Fibre Channel Mass Storage minimum patch requirement PHKL_22874 is met. (Latest patch is PHKL_34161.)
NOTICE : SCSI IO Subsystem Cumulative Patch patch PHKL_23666 is installed on this host.
NOTICE : Latest PHKL_23666 SCSI IO Subsystem Cumulative patch is installed.
NOTICE : SCSI IO Cumulative Patch patch PHKL_30510 is installed on this host.
NOTICE : SCSI IO Cumulative minimum patch requirement PHKL_29047 is met. (Latest patch is PHKL_34815.)"
julianvan_64cce1
12 Posts
371
0
Posted August 4th, 2007 06:00
so if you change shared memory for the app back to
what it was before ...can you boot with CX400
connected ?
Yes,hpux boot normal.julianvan_64cce1
12 Posts
371
0
Posted August 4th, 2007 20:00
hmm..sounds more like OS/App issue. Can you increase
app memory in smaller increments?
Good idea, I will try to increase share memory in smaller.- This probably isn't related, but with no zoning implemented on your Brocade switch all hosts and storage are basically in one large default zone. You may want to implement zoning and create a separate zone for the host and the hp array storage ports and a separate zone for the host and clariion storage ports. It will make life easier down the line if you add more storage and may help you to avoid some issues in the future.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
371
0
Posted August 4th, 2007 05:00