
未解决
回复(10)
解决方案(0)
这个错误有对应的知识库文档:"error: "duplicate volume name "A178205" select a new name or remove the original volume"" https://support.emc.com/kb/123437,解决方法如下:
Resolution
- Check all the existing tapes and confirm they show the volume name correctly. If not it could possibly be a database corruption. Contact EMC support.
- If the issue is only while labeling a new tape, then follow the steps below:
2.1 First confirm if the above volume (VOL_NAME) exists in Networker or not. Run the following command,
mminfo -avot -q volume=VOL_NAME
If the volume exists, it will show all savesets and other related information, else the command will fail
with the following error:
6095:mminfo: no matches found for the query
2.2 Confirm the same in NMC as well (NMC -> Media -> Volumes)
2.3 If the volume does not show up in mminfo nor NMC, delete the volume manually using the following command,
nsrmm -d
2.4 Now try to label the volume again.
另外还有两篇英文讨论贴都有说到这个问题,基本上都建议先检查一下drive ordering,如果这个问题不解决,这个错误就会反复出现:
回复

liulei_it
2 Intern
•
3209 帖子
2469
0
已发布 February 1st, 2015 19:00
哥们咱也遇到过,先把运作的备份都abort,然后把加载在driver中的tape卸载,最后关闭 EMC GTS和 netoworker 所以有关的服务都停止哦, 然后保修并祈祷吧,如果有Oracle数据库注意归档日志目录是否快满了,快满了手工先del不然Oracle就要挂。