‎Partitioning and GoBack | DELL Technologies

Start a discussion

UNSOLVED

bc_acadia

updated

23 years ago

bc_acadia

38 Posts

0

5244

March 7th, 2004 21:00

Partitioning and GoBack

Has anyone used GoBack on a partitioned hard drive? I know that it is suppose to be possible but has anyone here actually done it? Thank you.

Message Edited by bc_acadia on 03-07-2004 06:23 PM

M
msil217
2 Intern
•
1997 Posts
90
0
Posted March 7th, 2004 21:00

@bc_acadia wrote:
Has anyone used GoBack on a partitioned hard drive? I know that it is suppose to be possible but has anyone here actually done it? Thank you.
Message Edited by bc_acadia on 03-07-2004 06:23 PM

Yes, but I believe you have to uninstall GoBack and reinstall for it to recognize both partitions.

It has been awhile since I partitioned. But you have to disable GoBack before you partition.

If you install a second hard-drive as a slave, after reformatting and partitioning it, you have to uninstall and reinstall GoBack to protect both drives.
Message Edited by msil217 on 03-07-2004 05:47 PM
C
chuket
1388 Posts
90
0
Posted March 7th, 2004 23:00
bc_acadia

If your drive was partioned first and then GO Back was installed, you should have both drives listed in Go Back. If that is the case, go to start> programs> Go Back. Click on the file tab and on the menu you should see Drive C: and D:(or whatever your present scheme is). If you added a new drive after Go Back was installed, I would go with Msil217's advice.