UNSOLVED
A
andrwleong
6 Posts
0
9342
May 22nd, 2007 08:00
Dimension E521 Freezing on start up
Hi
I have just bought a Dimension E521 and since i have installed a Lemax printer, the PC is frozen on the DELL start up screen and loads after about 20 minutes. However, if i remove the USB cable from the back of the PC the PC works fine.
What do i have to do
Message Edited by andrwleong on 05-24-2007 05:30 AM
Message Edited by andrwleong on 05-24-2007 05:34 AM
andrwleong
6 Posts
231
0
Posted May 24th, 2007 06:00
Hi yes the computer loads up when I pull out the Lemax printer.What do I do?GioAguilar
2 Intern
•
1882 Posts
231
0
Posted May 24th, 2007 13:00
Probably this printer has a card-reader, that makes the computer to try to boot there. Go to the BIOS (F2 at POST) and then go to boot sequence, in there you'll see all the devices where the computer can boot, HDD, CD/DVD, USB, etc... not sure if in yours, by pressing U or D you can move options Up or Down, or if you will remove an item by presing the Space Bar.So put your Hard Drive on the top of the list, and the CD/DVD on second, disable the other, since they are useless...andrwleong
6 Posts
231
0
Posted May 25th, 2007 11:00
yes the printer has card reader (card froms mobile phones or cameras)I will try this and get back to you.Thank you for your helpandrwleong
6 Posts
231
0
Posted June 3rd, 2007 15:00
THANK YOU SO MUCH THIS WORKED.THANK YOUUUUUUUUUUUUUUUUU:smileyvery-happy:
GioAguilar
2 Intern
•
1882 Posts
231
0
Posted May 22nd, 2007 14:00