Help

Start a discussion
UNSOLVED

flya750

updated

14 years ago

F

flya750

24 Posts

0

6764

June 19th, 2012 13:00

Changing IP Address on Control Station - VNX 5300

Hello,

We have two VNX 5300 devices and recently we've updated our internal DNS Servers and the new Servers have new IP Addresses.  I need to update the DNS settings in the VNX devices. There are a few areas in the UniSphere GUI to update the DNS Servers (Data Mover, Control Station etc.).  I've updated the Data Mover sections but I can't seem to locate where I change the Control Station Settings under the Network Settings option.  I can see the old DNS Server IP Addresses but there is no option to update the fields?

Can any help help me on this?


Thanks,

Taral

  • D

    dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1338

    0

    Posted June 19th, 2012 14:00

    try root/nasadmin

  • D

    dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1338

    0

    Posted June 19th, 2012 14:00

    make sure to point your browser to the control station IP address, login as root, scope local

  • F

    flya750

    24 Posts

    1338

    0

    Posted June 19th, 2012 14:00

    Hello,


    Thanks for the reply.. I am logged into the Control IP.. I see the local Scope... but I don't have the root user password.

    This was setup by a previous consultanting company and they didn't leave ANY documentation.  Is there a default password for the root user on these VNX 5300 devices. 

    I can login to the glocal scope using a sysadmin user.  But that user does not give me access to change the control station DNS settings.

  • F

    flya750

    24 Posts

    1338

    0

    Posted June 19th, 2012 14:00

    It looks like I figured out my root password.. nasadmin.... 

    I should be able to figure it out from here.. Thanks!

Dell Support Resources

Latest Solutions

View More