Solved!
Go to SolutionBoth Eth Links Down
I'm extremely new to VNXe, just set my first one up and of course there are problems. Both of my ethernet links are down, but I'm getting blinkies. eth2 is plugged in on both spa and spb. I was able to add my esx hosts, everything is on the same subnet for setup purposes, so I'm able to get to those. When I go to Settings-More Config-Advanced Config-Base ports on SPa and SPb are both down. Did I miss a part of the setup? Thank you!
chrislogo
98 Posts
307
0
Posted May 23rd, 2012 03:00
From what I understand , the -Advanced Config shows that eth2 is down but it works fine as in you are able to connect to the ESX host using eth2 , please let me know what the status of the ports are from System > System Health , let me know if it shows green for eth2 ports on SPA and SPB from there , this could be a code issue , please let me know what code your on currently.