Solved!
Go to SolutionJ
jslabonte1
12 Posts
0
976
December 15th, 2016 07:00
File service - Sharing FE port for async and CIFS
Hello,
I have a customer who need to share a front end port for both CIFS/NFS file service AND for asynchornous replication.
Performances considerations aside, is that even possible?
Thank you!
SANNAS_whatever
7 Posts
704
0
Posted December 15th, 2016 07:00
For Asynchronous Replication, the Replication Interfaces are dedicated IP-based connections between the systems that will carry the replicated data. The interfaces are defined on each SP using IPv4 or IPv6 addressing and will establish the required network connectivity between the corresponding SPs of the source and destination systems. The Replication Connection pairs together the Replication Interfaces between the source and destination systems. It also defines the replication mode between the systems; Asynchronous, Synchronous or both. The connection is also configured with the management interface and credentials for both of the replicating systems.
From unity replication admin guide
jslabonte1
12 Posts
704
0
Posted December 15th, 2016 08:00
Thank you sir, I'm relieved.
Rainer_EMC
6 Operator
•
8645 Posts
704
0
Posted December 16th, 2016 03:00
yes the interface is dedicated but the port is not
Rainer_EMC
6 Operator
•
8645 Posts
704
0
Posted December 15th, 2016 08:00
yes
you will be using different interfaces that can share the same physical port or LACP group