Dear customer

I'd like to ask you to follow below.

https://www.dell.com/support/kbdoc/en-au/000134013/dell-poweredge-update-the-firmware-of-single-system-components-remotely-using-the-idrac

iDRAC: How to Update Firmware Remotely Using the iDRAC Web Interface ,and use update with individual files instead of catalog.

 

Process: 

1. Log in to the iDRAC8 or iDRAC7.
2. Go to Overview, then click iDRAC Settings, and then click Update and Rollback. The Firmware Update page is displayed.
3. From the Update tab, select Local as the File Location.
4. Click Browse, select the firmware image file for the required component, and then click Upload.
5. After the upload is complete, the Update Details section displays each firmware file that is uploaded to iDRAC and its status. If the firmware image file is valid and was successfully uploaded, the Contents column displays a (+) icon next to the firmware image filename. Expand the name to view the Device Name, Current, and Available firmware version information.
6. Select the required firmware file and do one of the following:
   • For firmware images that do not require a host system reboot, click Install. For example, this could be an iDRAC firmware file.
   • For firmware images that require a host system reboot, click Install and Reboot or Install Next Reboot.
   • To cancel the firmware update, click Cancel.
7. Click Job Queue to display the Job Queue page, where you can view and manage your pending firmware updates. You can also click OK to refresh the current page and view the status of the firmware update.

 And please visit https://www.dell.com/community/en/direct-messaging

 

Respectfully,