UNSOLVED

Alexmed

updated

6 years ago

A

Alexmed

1 Rookie

•

2 Posts

2

3332

July 3rd, 2020 08:00

Driver update won't get past validating

The title says everything. The most recent recommended update gets stuck in "validating". I have a Inspirion 5590, got it this year. From checking around, it seems I am not the only one having this problem, however the solutions I've seen did not work.

  • garioch7

    7 Practitioner

    •

    318 Posts

    •

    1621 Points

    2651

    0

    Posted July 3rd, 2020 08:00

    @Alexmed 

    Have you tried disabling your anti-virus/anti-malware software?  It sometimes interferes with SupportAssist installing drivers, and the symptom of being stuck "Validating" is common to that issue.

    I hope this helps.  Have a great day.

    Regards,
    -Phi

  • DELL-Cares

    Moderator

    •

    27855 Posts

    •

    781 Points

    2653

    0

    Posted July 3rd, 2020 08:00

    Thank you! We have received the required details. We will work towards a resolution via private messages to ensure the security of your information. In the meanwhile, you may receive assistance or suggestions from the community members as well.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • Alexmed

    1 Rookie

    •

    2 Posts

    2604

    1

    Posted July 5th, 2020 10:00

    To anyone reading this thread that had the same problem, the solution was to download the driver manually. 

  • garioch7

    7 Practitioner

    •

    318 Posts

    •

    1621 Points

    2594

    1

    Posted July 6th, 2020 09:00

    @Alexmed 

    Glad to hear that you were able to resolve your problem.  Sometimes the "direct" approach is the best approach!

    Have a great day.

    Regards,
    -Phil

  • SteveTree

    2 Intern

    •

    36 Posts

    110

    0

    Posted August 1st, 2023 14:00

    Agreed. Start with any outbound firewall. In particular, those running Malwarebytes Windows Firewall control, set the profile to 'Low Filtering'. Once the update finishes, set it back to 'Medium Filtering' (or 'High Filtering' if you use that).

  • Maxx08

    3 Posts

    80

    0

    Posted August 3rd, 2023 23:00

    Thank you @Alexmed for the solution.
    I was facing the same issue.