UNSOLVED

Braunsky

updated

20 years ago

B

Braunsky

7 Posts

0

2769

September 10th, 2006 03:00

DVD Drive - Options

I am having problems with the Sony CRX216E CD-RW drive that came with my Dimension 4600 (cannot write with the WinXP CD writing wizard - keep getting "cannot finish" message) and am looking at a Sony DRU-810A or 820 as a replacement.  First question: any idea whether there are compatibility issues with my Dimension 4600?  Second question: the difference between the two Sony drives is that the newer 820 writes in DVD-RAM.  I'm not familiar with all the different DVD formats that each writes in, and don't know whether the DVD-RAM is worth getting.   Third question: if I leave the Sony CRX in the machine, should I put the new drive in its place and move it down one slot?  Set both for cable select or one master and one slave?  Thanks in advance for comments.
  • Predator

    2 Intern

    •

    15286 Posts

    151

    0

    Posted September 10th, 2006 13:00




    Hi Braunsky,

    Before we get to your 3 questions, will the Sony work with any other burning software, per say Sonic, which is most likely what Dell shipped?
    Q #1) Both of these drives are standard IDE devices so either should work fine with your system.

    Q #2) One of Regulars, Mike~Skybird gave us a very good article on the formats, please check this out; http://www.the-predator.com/dell/sec7-1.html#7-1-7. Then do just a little research and see if you will find use for the DVD-RAM format. I myself did not but that means nothing.

    Q #3) If the Sony`s burning function has failed but still works as a reader, you may wish to keep it but that choice is your my friend. Either way, I would make the new DVD/RW Master, now staying true to Dell`s set-up, go to Device Manager, select the Sony and click Uninstall, then shutdown. Place the jumper on the DVD/RW to Cable Select, place it in the Top Bay, "end" connection of the IDE cable. If you decided to keep the Sony, second bay, "middle" connection. Turn the system on, enter the BIOS and verify that both drives are turned on, save/exit. Install any burning software and DVD decoding software that may come with the drive.
    A note on burning software; do not install two Packet Writing programs. Nero`s is InCD, Sonic`s is DLA and Roxio is Drag to Drop, they tend to clash.

    Good luck and hope I covered what you requested.

    Best Regards!





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link

  • Braunsky

    7 Posts

    151

    0

    Posted September 10th, 2006 17:00

    Jeff - thanks for the information.  Yes, I can burn CDs on my Dell 4600 using the Sonic "Record Now."  With the Win XP Writing Wizard I wondered if the problem was that the Windows  IMAPI CD burning service was continually turning off, no matter what setting I used (automatic, manual, no restart after failure, restart after failure,....).  I have WinXP home version at home but I'm having a similar problem with WinXP Pro on my Dell computer at work, where I cannot even burn a CD with the Roxio software that came with that Dell 4500.  I wondered if the problem was that WinXP Writing Wizard and Roxio shared some code or whether it was my CD drives coincidentally starting to fail at about the same time.

    Thanks for the other intormation.  I'll read the article.  My need to create DVDs is quite basic, so I'm not sure which of the multitude of formats I'll actually need.  In your installation suggestions, when you say "enter the BIOS" do you mean start up in safe mode or protected mode or command mode or just normal start-up and then check device manager?

    Braunsky 

  • Braunsky

    7 Posts

    151

    0

    Posted September 11th, 2006 01:00

    Jeff - one more point/question.  I just recently downloaded an evaluation version of Easy CD-DA Extractor (long after I started having problems with the CD drive and WinXP CD writing wiz).  It seems to be a great program for converting content, and worked just fine converting an audio CD with tracks in .cda format to mp3.  The mp3 file plays flawlessly.   Interestingly, the last track on the same audio CD starts and stops erratically while I'm playing it in my existing CD drive.  My question re Easy CD-DA Extractor is whether it could conflict with Sonic Record Now.  I understand that the Sony DRU-810A comes with Nero Express.  Would you recommend that I stick with Sonic?  I have read some negative and some positive comments about Nero.

    Braunsky

  • Predator

    2 Intern

    •

    15286 Posts

    151

    0

    Posted September 11th, 2006 12:00

    Hi Braunsky,

    The Master software of either program, Easy CD-DA, Sonic and even Nero can work on the same system without conflicts the majority of the time. Any problems we see is associated with installing two Packet Writing programs, DLA, InCD, etc...
    I have always liked Nero, still using version 6. There were some bugs in version 7, so I never updates, not sure if they have ben corrected but surely bye now they should have been. I have never used Sonic, so my imput would not be the best on this issue.

    Jeff
  • Braunsky

    7 Posts

    151

    0

    Posted September 12th, 2006 01:00

    Jeff - thanks.  I'll watch out for installing dueling packet writing components.  As for installing a new DVD drive, what did you mean when you said "enter the BIOS"?  Also, any ideas on the failure of the WinXP CD writing wizard?  I'm seeing more complaints about this problem on other boards besides Dell.

    Braunsky

  • Predator

    2 Intern

    •

    15286 Posts

    151

    0

    Posted September 12th, 2006 11:00




    Hi Braunsky,

    We have found at times, not always, when adding a second drive, the Dell BIOS does not always adjust properly and leaves the drive turned off. Windows will usually pick it up but drop it in PIO mode. so we tend to recommend Members to enter the BIOS and verify that both drives are turned on. Our internet provider, Adelphia, has had hub troubles so our service is a hit`n miss at the moment. I have searched some of the MS news groups but not much yet. I found one mention of reinstalling WMP but that was it.


    Best Regards!




    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link