DVD burner having problems burning DVDs b/c it says DMA is turned off...
Okay, I have an Inspiron 9300 XP Media Center with the DVD burner. When I first got it over the summer, DVD burning worked fine. However, last week when I tried to burn a DVD off of my hard drive, SonicMyDVD tells me that DMA is turned off for one or more of the recording devices. Then it proceeds to read a 2GB file as being 12GB, which obviously won't fit on the standard 4.7GB DVD. Thinking it was the program, I tried using Roxio Media Creator instead with similar results. I don't know much about Direct Memory Access, but the Hardware Profiles say it's enabled. I tried disabling it and re-enabling it, and I've also tried System Restore to go back to when it worked, but so far with no luck. I haven't had any new programs installed lately that could possibly have caused this, so I'm stuck. Any help would be very much appreciated.
First of all, thanks for the response. I was able to do everything up until the point where I was supposed to go to the file HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E96A-E325-11CE-BFC1-08002BE10318} \0001 AND \0002. The folders 0001 and 0002 did not exist, but 0003-0005 did. I don't know what this means, but it could very well be what's causing the problem. Thanks again for the help.
For the record, the 0003-0005 changes weren't applicable considering that the options weren't the same. I'm still having the problem, and have no clue as to how to fix it.
Message Edited by Trentw427 on 12-15-2005 09:27 PM
Trentw427
7 Posts
520
0
Posted November 30th, 2005 16:00