UNSOLVED

UrielUtter

updated

18 years ago

0

25938

September 18th, 2008 17:00

Bought a new Hard Drive, Inspiron 9400 won't recognize entire capacity

When the HD in my Inspiron 9400 failed (after the warrantee period, of course) I had my office's IT folks install a new Seagate 250GB drive.  The machine sees it as the same size (87.03 GB after partitioning) as the old drive.  I have updated BIOS to A09, attempted to run Acronis to increase the 'available' disk size, nothing has worked.  Any suggestions?
  • Balaji Ramanath

    2 Intern

    •

    1765 Posts

    636

    0

    Posted September 18th, 2008 18:00

    The article I linked to gives you several options for repairing the problem:

     

    How To Repair A Truncated Disk

    If you've already made the mistake of copying LBA-3 and had it hide the HPA, then you will need to take the extra step of unhiding the HPA. Zeroing LBA-3 and recloning will prevent the HPA from being hidden again in the future, but that will not unhide an already-hidden HPA.

    There are several tools that can be used to unhide the HPA and return a hard disk to its full capacity. These include Hitachi Feature Tool, Seagate SeaTools, Magic Boot Disk (MHDD), and HDAT2, among others.

     

    I guess reformatting would solve the problem too, but maybe not. 

  • Balaji Ramanath

    2 Intern

    •

    1765 Posts

    636

    0

    Posted September 18th, 2008 18:00

    Check here for some information.  There may be an issue if you cloned your original hard drive including the media direct partition to your new hard drive.

     

    http://www.goodells.net/dellrestore/mediadirect.htm

     

  • 636

    0

    Posted September 18th, 2008 18:00

    This seems to be exactly what happened to me, albeit by my IT folks.  Will reformatting the drive solve the issue?
  • 636

    0

    Posted September 19th, 2008 16:00

    I cannot get the Hitachi feature to boot (maybe I don't know how to make a bootable ISO disc properly), Magic Boot Disk also will not load (probably the same problem).  HDAT2 will never come up with a web page.  SeaTools will not fix anything so far.

     

    Here's where I am:

    I have two HDs.  The original, with all '4' sectors (3 visible to disk management) is currently sitting as my installed HD.  My new HD, 250 GB, is sitting in an external enclosure with one visible 91.25GB partition.  None of the low-level formatting tools I've attempted to use will clear the HPA partition, and the existing partition is blank.

     

    This is because the new drive was being used as my C: drive with the old disk being used to store data.  When I began looking at how to restore the full size of the drive, I had enough space 'visible' on the new drive to put all the data from the old drive on it, and then clone the new drive back onto the old one, putting me effectively back at square 1, except I still have the HPA on the new drive, truncating a sickening 159 GB or so of space.

     

    I can reimage the new drive with only the main partition from the old, but I have no idea what that will do to the boot functionality of the drive.  I don't think any of these pieces of software will kill the HPA if its not in the computer (none of them want to see an external drive or something??).

     

    Any suggestions?  How do I take a download link for an ISO and turn it into a functional boot disk?  Oh, and I really don't care two hoots about Media Direct.  If I could take it off my computer entirely, I would.

    Message Edited by UrielUtter on 09-19-2008 01:05 PM
  • 636

    0

    Posted September 19th, 2008 17:00

    Thank you very much for all your help to date.  I have downloaded imgburn and will use it for the ISO file.  Do you know if I need to have all of the 3 visible partitions off of the current HD in order for the system to be bootable?  I'm fairly done with Dell at the moment, and I really don't want to have to put up with the system trying to re-create LBA3 or the HPA if there's some form of code in either of the two recovery partitions that will do so, and I'd rather skip them.  Any insight into what are, for me, these mysteries?
  • Balaji Ramanath

    2 Intern

    •

    1765 Posts

    636

    0

    Posted September 19th, 2008 17:00

    I would suggest you download imgburn from www.imgburn.com and use the first option in the GUI (write image file to disc) to burn your images to CD to create a bootable CD.  That should solve that part of the problem.

     

    As for recreating a single partition image, it is probably worth a try.  I would get an external drive to back up all your personal files, then reformat the new disk and start from scratch if you want to go this route.  That would be safer than trying to get all this accomplished while worrying about your files getting damaged or worse. 

  • Balaji Ramanath

    2 Intern

    •

    1765 Posts

    636

    0

    Posted September 19th, 2008 17:00

    If you burn an ISO to CD, then the CD should be bootable if the image was supposed to be for a bootable disc.  Nothing more to it.  Use a tool like imgburn to just burn the image to CD (I hope you are not creating a data disc with the ISO file as the contents of the disc.  You have to choose the option in your CD-burning software of burning an image to disc and then choose the image file rather than choosing the option of burning a data CD and choosing the image file as the data file to burn).

     

    I believe you can reimage just a single partition of the original drive onto the new drive.  But given that the problem is already present in your drive, I don't know whether that will get rid of the truncation.  Have you gone through the entire goodells.net site to see if you are missing some other fix? 

  • 636

    0

    Posted September 19th, 2008 17:00

    Something is messed up then, because I've tried both the Hitachi and MHDD things, I'll have to look at how I'm copying them to disc.  I only have Sonic for a copy utility beyond copying and pasting from windows to the cd, then telling the system to write the file...

     

    I haven't gone through the entire goodells site yet, I only have so much time while I'm 'working' to look at this.

     

    Thanks for your suggestions, I appreciate them.  Do you think that if I re-clone the single partition to the truncated drive (I've got the space, I believe) and go about trying the partition removal from there it would work better than leaving the drive in an external enclosure?  all indications are that this is exactly what I should do, but I'm worried about corrupting my files.

  • Balaji Ramanath

    2 Intern

    •

    1765 Posts

    636

    0

    Posted September 19th, 2008 19:00

    You don't need to have all the partitions unless you really like media direct and intend to continue using it after you install your new hard drive.  Otherwise, all you need is one partition with the OS on it.  That is all it takes for the computer to operate.
  • 423

    0

    Posted September 20th, 2008 01:00

    Well, I am 95% of the way there.  After a bunch of attempts, it seems that the HDDGuru-ware was able to eliminate my HPA, but there was still the problem of getting the system to recognize the full size of the disk.  Hitachi's FTool fixed that.  So I copied only the Partition containing my C: Drive, and set it to active, but the HDD won't boot.

     

    What piece am I missing to this puzzle?  Do I need a new MBR, can I use the MBR from the old drive?  If that's the case, which partition is it in?  I'm sooooo close.  This has been quite a learning experience so far.

     

    Message Edited by UrielUtter on 09-19-2008 09:47 PM