SIN RESOLVER

XavierAND

actualizó

3 years ago

Cerrado

X

XavierAND

1 Rookie

•

9 Publicaciones

0

210

July 25th, 2023 03:00

Dell N3048 MAC LACP

Hi, 

I have a problem communication LACP between Firewall to Switch. My firewall provider asked me, what is my LACP MAC. I tried to execute the command show LACP, show interfaces port-channel and tech-support but I didn't have this information. How can I obtain the LACP MAC in switch series N?

Thanks, 

  • Kashmir

    1 Rookie

    •

    11 Publicaciones

    59

    0

    Publicado July 26th, 2023 07:00

    Hi Xavier,
    U can see MAC LACP (Port-channel) in this command:
    please enter in privilige mode and type: show interface port-channel "X" ... X is number u port-channel.

  • XavierAND

    1 Rookie

    •

    9 Publicaciones

    51

    0

    Publicado July 27th, 2023 00:00

    Hi, 

    I tried your order but it hasn't the LACP MAC address.

    show interfaces port-channel 2

    Channel Ports Ch-Type Hash Type Min-links Local Prf Rx Util Tx Util
    ------- ----------------------------- -------- --------- --------- --------- --------- ---------
    Po2 Active: Gi1/0/3, Gi2/0/3 Dynamic 7 1 Disabled 198 282

    Hash Algorithm Type
    1 - Source MAC, VLAN, EtherType, source module and port Id
    2 - Destination MAC, VLAN, EtherType, source module and port Id
    3 - Source IP and source TCP/UDP port
    4 - Destination IP and destination TCP/UDP port
    5 - Source/Destination MAC, VLAN, EtherType, source MODID/port
    6 - Source/Destination IP and source/destination TCP/UDP port
    7 - Enhanced hashing mode

    Thanks, 

  • XavierAND

    1 Rookie

    •

    9 Publicaciones

    42

    0

    Publicado July 28th, 2023 02:00

    Hi, 

    Finally, I execute this order to obtain LACP MAC address.

    show interfaces detail port-channel X

    Thanks,