robertginea

updated

3 years ago

0

2675

November 30th, 2020 07:00

Precision 5540 with WD19 - only 30Hz on Display port - please help

Hi guys.
Today I purchased Precision 5540 to replace my old Precision 7530.
I'm using Dell WD19 Dock with 180W adapter.
I have installed drivers, made firmware and bios update, but it just won't go 60 hz instead of 30Hz on Display port.
I have more 4K monitors, none of them works with 60Hz with display port cable.
1. Philips 32" Momentum 326M - only 3840x2160 @ 30 Hz
2. Dell UP3214Qt - only 1024x 768.
3. Samsung U28E590D - only 3840x2160 @ 30 Hz.

 

I only want to use SINGLE monitor, but I used these monitors to see if there is an incopatibility problem.

I also changed the display port cable, problem persisted.

 

Before this purchase (Precision 5540+ WD19 dock), I was using all these monitors with Minidsplay port- Display port cable on my Dell Precision 7530 and worked 4k@60 Hz perfect.

Can you please please help me?

 
  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1982

    0

    Posted November 30th, 2020 08:00

    @robertginea  Happy to help, although sorry I didn't have better news for you.  Yes, you are correct on both of your follow-ups.  In theory if you had a regular USB-C dock that could be configured to set up the USB-C link to carry video and only USB 2.0, you'd have enough video bandwidth from DisplayPort 1.2/HBR2 systems to run a single 4K 60 Hz display -- but you'd be limited to USB 2.0 for everything else, including Ethernet, which would significantly bottleneck Gigabit Ethernet.  But the WD19 doesn't support being configured to operate that way, and I don't have a specific product recommendation for that sort of dock.  But you'll want to stay with Dell docks anyway if you're dealing with Precision 5540s because they're designed for 130W power sources, and 130W is actually above the 100W max of the official USB Power Delivery specs.  Dell did something proprietary on some of their systems and docks -- including the Precision 5500 Series and the Dell WD19 dock family -- to stretch the spec out to run 130W, but you won't find that elsewhere.  The WD19TB will provide 130W to the attached system though since it comes standard with a 180W power supply.

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1998

    0

    Posted November 30th, 2020 07:00

    @robertginea  This is normal for the WD19 when connected to a Precision 5540.  The Precision 5540 is a DisplayPort 1.2/HBR2 system, and therefore when its USB-C interface is set up to support both video and USB 3.x, which is how the WD19 will set it up, there isn't enough bandwidth to run 4K 60 Hz.  The Display Resolution Table in the WD19 User Guide on support.dell.com indicates this.  Running 4K 60 Hz and USB 3.x simultaneously over regular USB-C requires a system that supports DisplayPort 1.4/HBR3, which yours doesn't.  However, the Precision 5540 does support Thunderbolt 3, so if you were to get the WD19TB instead, you'd be able to tap into 4x more display bandwidth while still running USB 3.x, so with that dock you'd be able to run dual 4K 60 Hz displays from that system -- although there are some restrictions around the combinations of ports you can use if you want to do that.  The WD19TB's User Guide also available on support.dell.com goes into more detail about that.

  • 1991

    0

    Posted November 30th, 2020 08:00

    Ok, thank you for the fast reply.
    The bad news is I already bought 3 x pieces WD19.

    So what I understand is:

    1. If i use WD19TB i will be able to use 4K@60Hz display setting using the same 1 x USB C connector from my 5540, corect?

    2. I cannot disable USB's or other ports from my WD19 or make any other setting to increase the bandwith to use 4k@60hz, correct?

     

  • MarkSpanner

    1 Rookie

    •

    5 Posts

    0

    0

    Posted January 26th, 2024 13:57

    I had a similar issue with my WD19 + Microsoft Surface Laptop 4. Enabling DSC on the laptop resolved issues for me.
    See thread here:

    https://www.dell.com/community/en/conversations/inspiron/wd19-dock-doesnt-output-4k-60hz-on-hbr3-system/647f9c1cf4ccf8a8de0253b8?commentId=647f9c51f4ccf8a8de06a80c