
Solved!
Go to SolutionPrecision 7920 Raid configuration
Hello
I've added sas disk to my computer.
It appear on Bios setup but after there is no message displayed to get to the BIOS configuration utility.
Even if I press <Ctrl> + <R> .
Do you have and idea ?
Thanks
1 Attachment

dell_7920_sas_config.jpg
Responses (4)
Solutions (0)
Chino de Oro
11 Legend
•
8569 Posts
•
47224 Points
6
0
Posted November 20th, 2026 01:53
Hello @rbxlio , to build RAID configuration with SAS drives, you will need to add/install optional RAID controller. See the storage specs below.
Reply Hello Chino de Oro
Thanks for your help.
If I understand, sas drive is seen in bios but I can't configure it.
That need addon card.
I thought it was similar to Precision 7910 who has built in sas controller.
Storage informations are confused for 7920.
What are these ports used for?
1 Attachment

dell_7920_controller.jpg
Reply Chino de Oro
11 Legend
•
8569 Posts
•
47224 Points
3
0
Posted November 20th, 2026 12:31
Those are miniSAS ports. When connecting to proper backplane, the front flexbay can be used with NVMe SSD and U.2 SSD.
The 7920 has built-in SATA controller to operate SATA drives as well.
As seen on the last bullet from storage specs, SAS drives will need optional controller.
Both of the optional RAID controllers are tri-mode. They can connect to appropriate backplane for the storage you want/need.
Reply

Chino de Oro
11 Legend
•
8569 Posts
•
47224 Points
7
0
Posted November 20th, 2026 01:59
The optional RAID controllers for your system are: The MegaRAID 9440-8i and 9460-16i controllers.
See the Precision 7920 owner's manual.