‎PV100T DLTVS80 with Arcserve | DELL Technologies

Start a discussion

UNSOLVED

mlythaby

updated

22 years ago

mlythaby

4 Posts

0

4197

June 24th, 2004 12:00

PV100T DLTVS80 with Arcserve

We often have "unable to write to media" with "ATTENTION SCSI Bus reset, Drive Power Lost,or Media Chang"

errors. We are running Arcserve V9 (Build 2020), Windows 2000 SP4, Device Firmware is 5538

We used to experience this with the old DDS4 tape unit. It is not predictable.

Any advice would be helpful. thanks

P
Paulgs123
2 Posts
120
0
Posted July 26th, 2004 16:00
I am having the same problem. Did you ever get a resolution?

Thanks.
M
mlythaby
4 Posts
120
0
Posted July 27th, 2004 08:00
I have upgraded to the latest V9 release Build 2043, seems better but it has happened again.

I have been advised to boot using the Dell diag cd and run the drive diagnostice, I have yet to do this.
P
Paulgs123
2 Posts
120
0
Posted July 27th, 2004 14:00
I'll try that... Can I presume you have updated all the relavent drivers on your server as well?

Thanks for the help!