UNSOLVED

ikt

updated

13 years ago

I

ikt

12 Posts

0

22834

January 16th, 2014 01:00

MD3000i: Add new drives to existing disk groups

Hi,

We have a MD3000i.  Several months we added a new drive to the array, thinking thata it would be added to one of the existing disk groups.  However it was added as a  'Free space' group.  See the attached picture:

I would like to add the 'Free capacity' above to either 'Main-Raid-5' or 'Extra-Raid-5'.  How do I do that?

regards Tor

  • DELL-Sam L

    Community Manager

    •

    8150 Posts

    •

    34715 Points

    1188

    0

    Posted January 16th, 2014 12:00

    Hello IKT,

    I am not sure which version of firmware that your MD3000i is currently at so here are the 2 users guides each for the different firmware. If you look on the pages #’s that is listed for each users guide it tell you how to add the space to your disk group.

    Users guide for firmware 07.xx.xx.xx page 62

    ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000i_User%27s%20Guide20_en-us.pdf

    Users guide for firmware 06.xx.xx.xx page 62

    ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000i_User%27s%20Guide19_en-us.pdf

    Please let us know if you have any other questions.

  • ikt

    12 Posts

    1188

    0

    Posted January 16th, 2014 13:00

    Hi,

    Thanks for your reply.  I have FW ver 7.

    However this free drive has already been assigned to a disk group named Free Capacity (see screenshot).  When I try to delete it, (to make it unassigned and free capacity) the Delete button is grayed.  There is no data on that drive so I would like to delete the assignment and add it to an existing disk group as Free Capacity described on p 62 in the manual.

    How do I delete the screenshot's Free Capacity disk group or why is the delete button grayed out?

    Thanks for comments on this regards

    Tor

  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    1188

    0

    Posted January 17th, 2014 12:00