We recently did a migration from DMX3000 to DMX-4 (:)) for a Win2k3 host.
I've noticed that the "old" DMX3000 devices still appear in 'dead' state:
Pseudo name=harddisk21 Symmetrix ID=DMX-4 Logical device ID=1ED0 state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun254 c2t0d254 FA 8aA active alive 0 0 3 port3\path0\tgt0\lun254 c3t0d254 FA 9aA active alive 0 0
Pseudo name=harddisk?? Symmetrix ID=DMX3000 Logical device ID=01E0 state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun30 c2t0d30 FA 9aA active dead 0 1
Pseudo name=harddisk?? Symmetrix ID=DMX3000 Logical device ID=01F0 state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun31 c2t0d31 FA 9aA active dead 0 1
Pseudo name=harddisk?? Symmetrix ID=DMX3000 Logical device ID=0200 state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun32 c2t0d32 FA 9aA active dead 0 1
Pseudo name=harddisk?? Symmetrix ID=DMX3000 Logical device ID=0A4B state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun34 c2t0d34 FA 9aA active dead 0 1
Pseudo name=harddisk?? Symmetrix ID=DMX3000 Logical device ID=0A6D state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun35 c2t0d35 FA 9aA active dead 0 1
Pseudo name=harddisk?? Symmetrix ID=DMX3000 Logical device ID=0A6E state=alive; policy=SymmOpt; priority=0; queued-IOs=0 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 2 port2\path0\tgt0\lun36 c2t0d36 FA 9aA active dead 0 1
C:\WIN64\system32>
I tried removing them by issuing a 'powermt check force' command. But it doesn't seem to do anything.
C:\WIN64\system32>powermt check force Warning: Symmetrix device path c2t0d30 is currently dead. Warning: Symmetrix device path c2t0d31 is currently dead. Warning: Symmetrix device path c2t0d32 is currently dead. Warning: Symmetrix device path c2t0d34 is currently dead. Warning: Symmetrix device path c2t0d35 is currently dead. Warning: Symmetrix device path c2t0d36 is currently dead.
C:\WIN64\system32>powermt check force Warning: Symmetrix device path c2t0d30 is currently dead. Warning: Symmetrix device path c2t0d31 is currently dead. Warning: Symmetrix device path c2t0d32 is currently dead. Warning: Symmetrix device path c2t0d34 is currently dead. Warning: Symmetrix device path c2t0d35 is currently dead. Warning: Symmetrix device path c2t0d36 is currently dead.
C:\WIN64\system32> Here's the version I'm using:
C:\WIN64\system32>powermt version EMC powermt for PowerPath (c) Version 5.0.0 (build 94)
We've had previous experience with this phenomena. And all I remember is rebooting the server (and sometimes deleting the powermt.custom) would solve it.
Does anyone have a solution that doesn't require a reboot?
when you ran powermt check ..it should have asked you if you wanted to remove dead paths/devices. Did it do that? Unfortunately in my experience i end up doing the same thing you are ..rebooting my windows systems, unix OS's tend to work correctly.
I've never used PowerPath on Windows, but on Unix you can explictly remove devices using powermt remove dev=XXXXX, where XXXXX is the device name you want to remove. So for each of the dead devices, you could try running something similar to
dynamox
11 Legend
•
20419 Posts
•
87439 Points
640
0
Posted April 1st, 2008 03:00