
UNSOLVED
RAID 5 HARDWARE SETUP... POWEREDGE 2500 HELP NEEDED
Hello HELPFUL!
We have a
poweredge 2500 w/ a AIC 7899 scsi on board. We would love to setup
RAID 5 with three 36 gb scsi drives already on hand. We tried the software RAID 5 but quickly were taught that it was not possible. We have been combing the net looking for a similar issue but to no avail we have not been successful. We have the latest BIOS & Embedded Server updates already done. We simply have no clue as to the steps to getting the RAID 5 setup done through the HARDWARE or BIOS or?
We were told to somehow get into the array manager during bootup?
Other than that we have no idea where we go with this?
Thanks so much for any help that you can provide!
Regards,
Chris
Responses (1)
Solutions (0)

nickkearnsuk
4 Posts
205
0
Posted August 28th, 2005 16:00
Hi Chris
I think the scsi card you mention is a non hardware raid card if this is one that is built on board.
You can achieve raid 5 but only with software raid built in into ms windows server software.
Unless you have a raid card in one of the pci slots i.e
Adaptec PERC2/Si
Adaptec PERC3/Di
Adaptec PERC3/Si
LSI Logic CERC ATA 100
LSI Logic PERC 4/DC
LSI Logic PERC 4/Di
LSI Logic PERC 4/SC
LSI Logic PERC 4e/DC
LSI Logic Perc 4e/Di
LSI Logic PERC 4e/Si
LSI Logic PERC3/DC
LSI Logic PERC3/DCL
LSI Logic PERC3/QC
LSI Logic PERC3/SC
Then you can use the Dell CD ISO - Installation and Server Management and this will allow you to set up the raid array on installation of the os
I hope this helps
Regards
Nick