UNSOLVED
TS
thomas.suter
2 Posts
0
30433
July 19th, 2015 05:00
XenServer 6.5 won't recognize RAID1 on Dell S130
Hi
I got one more Problem ;) I have built a RAID1 on over to disks on a Dell S130 Software Raid controller. If I try to install XenServer 6.5 now, the installer won't regonize it as a Raid1 but show the two separate disks (/dev/sda & /dev/sdb)
Anyone got a solution for that?
theflash1932
11 Legend
•
16255 Posts
713
0
Posted July 19th, 2015 06:00
The PERC S130 is for Windows operating systems ONLY. It is a pretty terrible controller at that. You will need to disable RAID and use the drives in SATA/AHCI mode, or better yet upgrade to the H730 controller.