hwnewbie

updated

14 years ago

H

hwnewbie

6 Posts

0

85471

September 14th, 2012 07:00

Dell PowerEdge R420 - setting up RAID10 array

Hi.

I'm now installing R420 server, and I have one question about physical disk mode.

I'm entered BIOS, and changed SATA mode from "AHCI" to "RAID".

Then I removed preinstalled RAID5 Virtual Disk, and vreated RAID10 Virtual disk. Now array is initializing.

My question is: is it right switching SATA to "RAID" mode? May be, switching it back to "AHCI" mode will be more correct?

  • 3537

    1

    Posted September 14th, 2012 07:00

    Good morning.

    For the array to function, you have followed the correct procedure and it should be set to RAID.   The array will continue to initialize and you should be able to install the OS while it initializes in the background.

    Regards,

  • hwnewbie

    6 Posts

    3537

    0

    Posted September 14th, 2012 08:00

    DELL-Geoff P, thanx to reply.

    But, why preinstalled RAID5 array was set up with discs in "AHCI" mode? What reason for it?

  • 3537

    0

    Posted September 18th, 2012 12:00

    I had the same original question and I have the same follow-up question.