I see this in iDrac Storage after launch GUI (SLOT-01):

RAC0501: There are no physical disks to be displayed. 1. Check if the host system is powered off or shutdown. 2. Check if the physical disks are inserted into the enclosure or attached to the backplane. 3. There are no out-of-band capable controllers detected.

Also in iDrac Virtual and Physical disks I see:

RAC0503: There are no out-of-band capable controllers to be displayed. Check if the host system is powered off or shutdown.

All kinds of iDrac reset were unsuccesful, even unplugging power from VRTX for an hour.

In CMC Storage Setup Virtual Adapter 1 is mapped to SLOT-01.

There is RAID 1 created and assigned to SLOT-01 (Full access).

CMC firmware is 2.00

iDrac firmware is 1.57.57 (Build 04), BIOS version 2.4.3, LCC firmware is 1.4.2.12.

Assistance is needed strongly!

Thanks.

I've had this problem for ever on my R720. I've tried all suggestions from all forums but nothing has fixed it. Did you get anywhere?