UNSOLVED
S
serverworlds
1 Rookie
•
25 Posts
0
3655
February 3rd, 2005 16:00
PE6300 Fans?
I searched the forums to try to find the replacements fans for my PE6300.
I found this:
The Processor fan asembly is 2720C
The Hard Drive fan assembly is 85838
The fan by itself is 7972C. There is a total of 5 of these in each PowerEdge 4300 and 6300.
The Hard Drive fan assembly is 85838
The fan by itself is 7972C. There is a total of 5 of these in each PowerEdge 4300 and 6300.
But i pulled the bad fans and found a 3 fan assembly and 2 other fans that seem different. Is 7972C just "one" of the fans in the 3 fan assembly. I need to know so i don't order the wrong fan.
Plz help
check parts below
2720C System Board Fan Service Kit (contains 1 fan, 4 push rivets and a guard)
3599R Hotplug 7U Fan Assembly **Single Fan**
5F933 Hard Drive Bay Cooling Fans (w/Bracket for PCI Slots) *Use only
for Battery recondition failures on an Adaptec PERC 2 (PSQN document ID 142365)*
7972C System Board Fan Assembly (Fan Only)
85838 Hard Drive Midplane 3 Fan Assembly **Include Plastic shroud, 3 Fans**
Message Edited by cmisidro on 07-11-2005 10:13 PM
tankg
14 Posts
190
0
Posted July 4th, 2005 09:00
i found this on the forum, maybe you did too ?
Dreamthinker said :
"in other words, the 2300 uses two 120mm fans, one in the front, one on the back, and the 6300 uses 3 92mm, for the HD cage, and 2 92, for the CPU's, with a rather nice duct system, and all the fans on the 6300 (5) are twords the front, and placed back from the bezel a bit, but are still very loud, 60-70dba as a guess
the 6300's fans are also hot swapable, but you have to replace them within 10 seconds or so
you can do an ebay serch for "poweredge xxxx" and it will find some replacement parts for it"