UNSOLVED
Initial setup of server via idrac network port
hi there,
I have heard that you can configure new dell servers via the idrac network port. i.e. connect your laptop with an ethernet cable to the idrac network port, login, mount an iso and you can install the OS.
This would be useful for us installing servers in branch office server rooms where we may not have the luxury of a monitor, keyboard and mouse.
I can't however find any instructions on this. Can anyone confirm if this is possible?
Cheers,
Huw
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
7805
0
Posted November 5th, 2015 12:00
The following walkthrough will assist with the Virtual media, as well as starting the Virtual Console as well.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
7805
0
Posted November 5th, 2015 08:00
Huwy,
This answer will depend on the hardware installed, the server model, etc. Depending on the generation server, and the version of Drac installed, it will be possible. Now in order to successfully do this you will need the Enterprise version of the Drac, which includes the Remote Console, as well as Virtual Media. Which is the ISO part of your question.
If you specify the server model and drac version I could clarify and provide a guide/walk through specific to the equipment you are using.
Let me know.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!