As per advice at Microsoft.com I disabled all USB controller ports in Device Manager, restarted the pc-BUT the New Hardware prompt didn’t appear.Anyway, I then enabled all USB controllers but neither of two USB flash drives were recognized. I entered the service tag number here at Dell support but can’t find the USB drivers, assuming they need to be downloaded and reinstalled. Yes, this pc runs ancient XP OS, but the pc runs perfectly and I only use it for backups. I do NOT want junk this pc. Please let me know where I can find those USB drivers.
Thanks very much for this! Sure this is for the 875p chipset? If yes, but if so are those drivers one and the same as any Windows XP USB drivers that I would still need to find and install?
However, this ancient pc can’t connect to internet to do download. But it does have an optical drive and my sister has one in her HP desktop, so I can download it burn it to a CD-RW. Then just copy it to my desktop?
I don’t have the link but in reply to this apparently not too rare problem Anannya Podder at the Microsoft community offered this as one of 3 ways to get USB ports to again recognize a USB connected device. I purchased this pc new from Dell back in 2004 and this problem never happened until suddenly last week.
I don’t have the link but in reply to this apparently not too rare problem Anannya Podder at the Microsoft community offered this as one of 3 ways to get USB ports to again recognize a USB connected device. I purchased this pc new from Dell back in 2004 and this problem never happened until suddenly last week.
I would do what @JOcean suggested and install the chipset driver again.
As for the New Hardware Prompt, does the USB flash drive show up in Windows Explorer?
"so I can download it burn it to a CD-RW. Then just copy it to my desktop?"
There's 2 ways you can do that. Yes, you can move the file to your Documents folder. No need to put it on the Desktop. Or make a folder of your choosing, like "XP Downloads." Then install from there by clicking on install .exe icon or find the install application icon in the program folder. Depends on how it shows when downloaded - if it gives you an icon or a folder. Or, leave it on CD as long as it's saved there anyway, install from there with aforementioned tips.
I think you're also already familiar with downloads and shouldn't have any trouble.
Before I had the internet at home, I used to go to the library and save downloads to a flash drive. Besides installing, from there, I'd save them to CD in case of having to reload OS.
If by chance there's any confusion, I can make a video and upload the link. I haven't used XP in a long time, but still have some of the downloads.
To make a long story short I was able to unzip and launch the chipset utility without any apparent problem. It asked if I wanted to restart XP which I did. But again USB devices are unrecognized. I then restarted, hit F2 and looked for anything regarding USB drives but found nothing specifically. A hardware failure on the motherboard?
JOcean
11 Legend
•
12621 Posts
•
69453 Points
780
0
Posted April 9th, 2022 19:00
Have you tried to install the chipset drivers from this support page?
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop